Dorman 541-197 idler arm bracket for the 2011-2018 Chevrolet Silverado 2500 and other vehicles replaces the idler arm and bracket assembly in the steering linkage. It is a direct replacement for the original assembly when ball joint wear or impact has damaged the idler arm or bracket.
- Dorman OE Solutions line, Standard Replacement grade
- Pre-greased, with a dust boot included
- Coated finish
- Press-in attachment to the arm and press-in attachment to the frame
Quick facts
- Part: Dorman 541-197 idler arm bracket
- Also called: steering idler arm bracket
- Fits: 2011-2018 Chevrolet Silverado 2500 and other vehicles
- Condition: New
Loose or vague steering, play at the wheel or uneven tire wear can mean this idler arm bracket is worn, though tie rod ends or the steering gear can also be behind them, so find the cause before replacing anything. The 2011-2018 Chevrolet Silverado 2500 takes one.
Fits
The vehicles it fits include the 2011-2018 Chevrolet Silverado 2500, the 2011-2025 Chevrolet Silverado 2500 HD and the 2011-2025 Chevrolet Silverado 3500 HD. If your truck is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Arm attachment thread: 20 mm diameter, M1.5 pitch
- Arm attachment type: press in
- Frame attachment type: press in
- Mounting hole quantity: 2
Build and materials
- Grade: standard replacement
- Finish: coated
- Pre-greased: yes
- Dust boot: included
- Condition: new
- Country of origin: Taiwan
In the box
One bracket, one pitman arm, one ball joint, one Zerk fitting and two nuts, plus a dust boot.
Interchange: TA5584 · TA5644 · 84068279 · K400018 · GS50914 · MS50914
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
TA5584, TA5644, 84068279, K400018, GS50914, MS50914
Frequently Asked Questions
Does the Dorman 541-197 idler arm bracket fit the 2011-2025 Chevrolet Silverado 2500 HD?
Yes. Dorman 541-197 fits the 2011-2025 Chevrolet Silverado 2500 HD. For another truck, look in the "Vehicles it fits" section.
Does this idler arm bracket come with a ball joint and nuts?
Yes. The box holds one bracket, one pitman arm, one ball joint, one Zerk fitting and two nuts, and a dust boot is included.
What thread size does the arm attachment on Dorman 541-197 use?
The arm attachment thread on Dorman 541-197 is 20 mm in diameter with an M1.5 pitch, and the arm presses in.
How do I know if the steering idler arm bracket is worn?
Loose or vague steering, play at the wheel or uneven tire wear can mean the part is worn. Have a shop check the steering promptly rather than driving on a worn steering part.
Is Dorman 541-197 the same as TA5584?
Yes. TA5584 is one of the numbers Dorman 541-197 replaces.
