Dorman - OE Solutions Steering Idler Arm P/N:IA6447RD
Dorman IA6535RD idler arm for the 1999-2010 Chevrolet Silverado 2500 and other vehicles supports the steering linkage as the wheels turn. It replaces a failed original idler arm on the vehicles it fits.
A torn grease boot, grease seeping from the joint, loose-feeling steering or a clunk over bumps can be signs of a worn idler arm. The same signs can also come from the pitman arm, tie rods or steering gear, so let a shop measure the play in the linkage and pin down the source before you order. This listing is one idler arm, and these vehicles take one.
The 2016-2019 Chevrolet Suburban 3500 HD and the 2000-2013 Chevrolet Suburban 2500 are among the vehicles this arm fits, along with the 1999-2010 Chevrolet Silverado 2500 above, and it is designed to match the fit of the OE design in specified severe-duty applications. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One idler arm, one castle nut, one nut, one cotter pin and one Zerk fitting.
Interchange: TA2410 · TA5629 · 12471383 · 12479350 · 15891516 · 19435541 · K6535 · K6535HD · TXMS509117 · JIA245
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman IA6535RD idler arm fit a 1999-2010 Chevrolet Silverado 2500?
Yes. Dorman IA6535RD fits the 1999-2010 Chevrolet Silverado 2500, and each truck takes one. It also fits the 2000-2013 Chevrolet Suburban 2500.
Is there a steering idler arm for the 2016-2019 Chevrolet Suburban 3500 HD?
Yes. Dorman IA6535RD fits the 2016-2019 Chevrolet Suburban 3500 HD. For other years and models, look in the "Vehicles it fits" section.
Does the Dorman IA6535RD come with a castle nut and cotter pin?
Yes. Along with the idler arm, the box has a castle nut, a nut, a cotter pin and a Zerk fitting, so mounting hardware is included.
What stud thread size does this idler arm have, and is it a taper fit?
The arm stud thread diameter is 14 mm, and the arm attaches with a taper. This idler arm is 136 mm long.
What does the RD in Dorman's RD idler arm line stand for?
RD stands for rugged duty. The line is engineered for severe-duty service such as off-road work, heavy hauling and towing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.