Pitman Arm for 1975-1982 Chevrolet G10 & More - Dorman 541-436

$77.99

Vehicles this part fits

    Part number: 541-436
    UPC: 194883783560
    Condition: New
    Weight: 2.90 LBS
    Item Package Quantity: 1
    $77.99
    Adding to cart… The item has been added

    Have questions?

    Dorman - OE Solutions Steering Pitman Arm P/N:541-436
    Dorman - OE Solutions Steering Pitman Arm P/N:541-436
    $77.99
    $77.99

    Dorman 541-436 pitman arm for the 1975-1982 Chevrolet G10 and other vehicles links the steering gear to the steering linkage. It is a direct replacement for a worn or bent pitman arm, reverse-engineered to the design and dimensions of the original part.

    • Dorman OE Solutions line, standard-replacement grade
    • Cast/forged steel body with a coated finish
    • Spline end with 36 splines and a male taper end
    • Arrives pre-greased

    Quick facts

    • Part: Dorman 541-436 pitman arm
    • Also called: steering pitman arm
    • Fits: 1975-1982 Chevrolet G10 and other vehicles
    • Material: Steel
    • Condition: New

    A worn pitman arm can leave the steering loose and throw off alignment, and some catalogs list it as a steering pitman arm. Other linkage parts wear in similar ways, so have a shop check the arm for cracks, a bent shape or wear on the tapered end, and track down the source of the looseness before replacing anything. If the arm is the cause, this one replaces it.

    Fits

    As a direct-fit pitman arm, it also goes on the 1975-1982 Chevrolet G20, the 1975-1982 Chevrolet G30 and many other Chevrolet and GMC models. Open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Length: 131 mm
    • Steering shaft diameter: 32.3 mm
    • Mount hole diameter: 25.4 mm
    • Center link end attachment diameter: 0.25 in
    • End 1: spline, 36 splines
    • End 2: male taper

    Build and materials

    • Material: steel
    • Construction: cast/forged
    • Finish: coated
    • Stamped end: no
    • Pre-greased: yes
    • Grade: standard replacement
    • Condition: new
    • Country of origin: Taiwan

    In the box

    One pitman arm, one grease fitting, one cotter pin and one castle nut. This listing is one pitman arm, and the vehicle takes one.

    Interchange: TA5933 · 14002552 · K6130 · MS50975

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    TA5933, 14002552, K6130, MS50975

    Frequently Asked Questions

    Does the Dorman 541-436 pitman arm fit a 1975-1982 Chevrolet G10?

    Yes. Dorman 541-436 fits the 1975-1982 Chevrolet G10. For other Chevrolet and GMC models, open the "Vehicles it fits" section and check your exact model and engine.

    Does the Dorman 541-436 pitman arm come with a castle nut and cotter pin?

    Yes. The box holds the pitman arm, a grease fitting, a cotter pin and a castle nut, and the arm arrives pre-greased.

    What are the end types and spline count on the Dorman 541-436?

    One end is splined with 36 splines and the other is a male taper. The steering shaft diameter is 32.3 mm and the mount hole diameter is 25.4 mm.

    Is this pitman arm steel, and does it have a coating?

    Yes. Dorman 541-436 is a cast/forged steel arm with a coated finish, and it is a standard-replacement grade rather than a stamped-end design.

    Is Dorman 541-436 an interchange for part number K6130?

    Yes. K6130 is one of the numbers that interchange with Dorman 541-436, along with TA5933, 14002552 and MS50975.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review