Dorman - OE Solutions Steering Shaft P/N:425-272
Dorman 425-188 lower steering shaft for the 2009-2010 Chevrolet Traverse and other vehicles carries steering input from the column to the steering gear. This Dorman steering shaft directly replaces the original on specific vehicles and is precision-machined for a tight, secure fit.
Play in the steering wheel, a clunk or knock when turning, or a rough, binding feel can mean the shaft or its universal joint is worn. A worn tie rod end can give similar play, so these signs alone do not prove the shaft is the problem.
It is listed for a range of Buick, Chevrolet, GMC and Saturn models, including the 2007-2010 GMC Acadia and the 2008-2010 Buick Enclave. Not seeing your vehicle? Look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One steering shaft, one boot and two bolts. This listing is one lower steering shaft, and a vehicle needs just the one. Installation instructions are not included.
Interchange: 15115366
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 425-188 lower steering shaft right for a 2009-2010 Chevrolet Traverse?
Yes. Dorman 425-188 is listed for the 2009-2010 Chevrolet Traverse, which takes one. If your vehicle is a different model, find it in the "Vehicles it fits" section.
Does this Dorman intermediate steering shaft come with a boot and bolts?
Yes. Dorman 425-188 comes with one steering shaft, one boot and two bolts. Installation instructions are not included.
What size and material is the Dorman 425-188 steering shaft?
This lower steering shaft is steel, 24 mm in diameter and 290 mm long, with an internal profile on one end and an external profile on the other.
Why does my steering clunk when turning, and could the lower shaft be involved?
A clunk or knock when turning, or play at the wheel, can mean the shaft or its universal joint is worn. Have steering problems looked at promptly; a shop can inspect it.
Is this lower steering shaft rust-resistant and safety tested?
Yes. This Dorman steering shaft is tested to Federal Motor Vehicle Safety Standards and to torsional, tensile and fatigue durability tests. It is also salt spray tested and coated for corrosion resistance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.