Dorman - OE Solutions Steering Tie Rod End P/N:544-532
Keep steering input reaching the wheel at the front right corner with the Dorman - OE Solutions Tie Rod End, part number 532-768, a direct-fit replacement for the 1988-1994 Nissan Ichi Van and 1987-1988 Nissan Van (all engines). This front right outer unit links the steering linkage to the steering knuckle, carrying each turn of the wheel through to the tire.
In the box: one tie rod end, one castle nut, one cotter pin and one zerk grease fitting, so the mounting hardware is included and the joint can be serviced with grease.
Signs an outer tie rod end may need replacing include loose or wandering steering, extra play in the steering wheel, a clunk or knock when turning, and uneven tire wear. Other steering and suspension parts can cause the same symptoms, so diagnose the cause before replacing. This part is sold individually for the front right outer position. If the left side is also worn, replacing both sides together is recommended. A wheel alignment is advised after installation.
Country of origin: China.
Interchange: TA2526 · ES2831 · GES2831 · MES2831 · 48520G5101
This part cross-references / interchanges with the following part numbers:
What does this tie rod end do?
It connects the steering linkage to the steering knuckle at the front right outer position and passes steering input from the linkage to the wheel.
What comes in the package?
One tie rod end, one castle nut, one cotter pin and one zerk grease fitting. The mounting hardware is included.
Does it fit my 1988-1994 Nissan Ichi Van?
It is a direct-fit replacement for the front right outer position on the 1988-1994 Nissan Ichi Van and the 1987-1988 Nissan Van with all engines. Check the Buyer's Guide tab to confirm your vehicle.
What are signs a tie rod end may need replacing?
Loose or wandering steering, extra play in the steering wheel, clunking when turning, or uneven tire wear can indicate a worn outer tie rod end. Other steering parts cause similar symptoms, so diagnose the cause first.
Do I need an alignment after installing it?
Yes. Replacing a tie rod end generally changes the toe setting, so a wheel alignment is recommended. Follow the vehicle service information for torque values and cotter pin installation.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.