Dorman - OE Solutions Suspension Control Arm Bushing Kit P/N:533-435
Dorman 533-438 front lower control arm bushing kit for the 1987-1991 Chevrolet Suburban and other vehicles lets the control arm pivot while absorbing road shock. It is also listed as a suspension control arm bushing kit and holds two bushings for replacing worn ones.
Clunking over bumps, a loose steering feel or uneven tire wear can mean worn control arm bushings. Cracked or split rubber is another sign you may spot during a tire or brake service. Ball joints and shocks can cause similar symptoms, so find the cause first. If the bushings are the cause, this kit replaces them.
This front lower control arm bushing kit is a direct replacement that fits and performs like the original equipment on specific vehicles, including the 1987-1991 Chevrolet Suburban, the 1975-1995 Chevrolet G10 and the 1975-1995 Chevrolet G20. To check your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One kit with two bushings; the fitment lists one kit for each vehicle. Mounting hardware is not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 602.66012 · K-6137
TD596W · FB356 · 337972 · K6422 · GK6137 · GK6422 · MK6137 · MK6422 · JBU928
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 533-438 bushing kit fit a 1987-1991 Chevrolet Suburban?
Yes. Dorman 533-438 is listed for the 1987-1991 Chevrolet Suburban in the front lower position. For another model or engine, open the "Vehicles it fits" section and check your own.
Does the Dorman 533-438 kit come with mounting hardware?
No. Dorman 533-438 holds two bushings only, and mounting hardware is not included. Plan on new fasteners, since the old ones may not be reusable.
What size are the bushings in this control arm bushing kit?
Each bushing has a 25.5 mm inner diameter, a 54 mm outer diameter and a 54 mm width. The kit's overall outside diameter is 69.8 mm and its length is 66 mm.
How can I tell if my front lower control arm bushings are worn?
Clunking over bumps, a loose steering feel or uneven tire wear can come from worn bushings or from other suspension parts. Cracked or split rubber may show during a tire or brake service, and a shop can check for play.
Does Dorman 533-438 cross-reference to number K-6137?
Yes. K-6137 is on the Interchange line for Dorman 533-438, along with 602.66012, GK6137 and MK6137.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.