Dorman - OE Solutions Suspension Control Arm Bushing P/N:533-837
Dorman 533-671 front lower control arm bushing for the 2010-2025 Mercedes-Benz Sprinter 2500 and other vehicles lets the control arm pivot while absorbing road movement. Its rubber design helps restore smooth handling and directional stability.
A clunk over bumps, wandering steering or cracked rubber can mean this bushing is worn, though a worn ball joint or tie rod end can be behind the same signs. Replace the front lower forward bushings as a pair; this listing is a single bushing.
Along with the 2010-2025 Mercedes-Benz Sprinter 2500, this direct-replacement bushing fits the 2010-2025 Mercedes-Benz Sprinter 3500 and the 2018-2025 Mercedes-Benz Sprinter 3500XD. Driving something else? Search your own year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm bushing; each vehicle takes two. Mounting hardware, a bracket and a grease fitting are not included, so plan on new fasteners, because the old ones may not be reusable.
Interchange: TD847W · FB928345 · 68012169AA · 9063330014 · GS254189 · MS254189
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 533-671 bushing fit the 2010-2025 Mercedes-Benz Sprinter 2500?
Yes, Dorman 533-671 fits the 2010-2025 Mercedes-Benz Sprinter 2500. If your van is a different year or model, look it up in the "Vehicles it fits" section.
Does this control arm bushing come with bolts or a bracket?
No. The package holds one bushing only. Mounting hardware, a bracket and a grease fitting are not included, so plan on new fasteners.
What are the inside and outside diameters of this bushing?
Dorman 533-671 measures 12.2 mm inside and 45 mm outside, with 120 mm between the mounting holes.
How can I tell if a front lower control arm bushing is worn?
Cracked, torn or separated rubber, a clunk over bumps or steering that wanders can mean a worn bushing. A shop can test it to find the cause.
Is this rubber control arm bushing greaseable?
No. It is not greaseable and not reinforced, and its rubber bushing material has a 55-75 Shore A durometer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.