Dorman - OE Solutions Suspension Control Arm P/N:524-276
Dorman 520-276 front right lower control arm for the 1993-1998 Nissan Quest and other vehicles links the front right wheel assembly to the vehicle and lets the wheel move with the road. This Dorman control arm, also called a suspension control arm, holds the wheel in position while the suspension works.
Clunking over bumps, steering that pulls or wanders, and cracked or torn bushing rubber can mean a control arm or its bushing is worn. These signs alone do not prove the arm is the problem, since a worn ball joint can make similar noises.
As a direct replacement, it fits the 1993-1998 Nissan Quest and the 1993-1998 Mercury Villager. This listing is one arm for the front right lower position; the front left is a separate part, and the two are normally replaced together.
Fit and size
Build and materials
One control arm with its bushings. The ball joint, mounting hardware and grease fitting are not included, so plan on new bolts.
Interchange: 102-5914
F3XY3078A · RK620341 · FA4912 · GS20132 · CMS20132 · 2605767 · 545000B000 · 5CB30023
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 1993-1998 Nissan Quest control arm for the front right lower position?
Yes. Dorman 520-276 fits the 1993-1998 Nissan Quest and the 1993-1998 Mercury Villager on the front right lower side. The front left arm is ordered separately.
Does this Dorman control arm come with bushings?
Yes. Dorman 520-276 includes its bushings. The ball joint, mounting hardware and grease fitting are not included.
What are the bushing sizes on this Dorman lower control arm?
The rubber bushing measures 14.3 mm inside diameter and 39.6 mm outside diameter, and it is 92 mm long. The arm itself is 262.5 mm in length.
How can I tell if a control arm bushing is worn?
Cracked or torn rubber you can see with the engine off, clunking over bumps, or steering that pulls can each mean the arm or its bushing is worn. A shop can check for play.
What is the Dorman OE Solutions control arm made of?
Dorman 520-276 is a steel control arm of the casting/forged type with a powder-coated finish and rubber bushings. It is a standard replacement grade.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.