Dorman - OE Solutions Suspension Control Arm P/N:520-928
Dorman 520-461 front left lower control arm for the 2002-2010 Lexus SC430 and other vehicles connects the wheel to the chassis and guides its movement. This Dorman control arm is made of cast iron.
A clunk over bumps, uneven tire wear, steering that pulls or wanders, or cracked and torn bushings can mean a control arm is worn. Before you replace the arm, rule out a worn ball joint, a sway bar link or a tire problem, since those can produce similar symptoms.
The vehicles it fits include the 2002-2010 Lexus SC430, the 1998-2005 Lexus GS300 and the 2001-2005 Lexus GS430, each taking one arm on the front left side. This Dorman lower control arm is a direct replacement that fits and performs like the original equipment on these vehicles. Open the "Vehicles it fits" section to check your exact model and engine. Both front sides are normally replaced together; this listing is one arm for the front left, and the front right is ordered separately.
Fit and size
Build and materials
One control arm. A ball joint, mounting hardware and a grease fitting are not included; plan on new bolts rather than reusing the old ones.
Interchange: 102-5784
TC5987 · CA4177 · 1CB86045 · RK640410 · GS86103 · CMS86103 · 2605811 · 4806930290 · 4806930300
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right GS300 control arm for the front left of a 1998-2005 Lexus GS300?
Yes, Dorman 520-461 is a front left lower control arm that fits the 1998-2005 Lexus GS300. Open the "Vehicles it fits" section to check your exact engine.
Is this the left or right side control arm for the 2002-2010 Lexus SC430?
This one is the front left lower forward arm. The front right side is a separate part, ordered on its own.
Are the bushings included with this Dorman suspension control arm?
Yes, Dorman 520-461 comes with its rubber bushings; the ball joint, mounting hardware and grease fitting are not included.
What is the 520-461 control arm made of?
The arm is cast iron with a powder-coated finish, and its bushings are rubber. The bushing measures 92 mm long with a 39.6 mm outside diameter.
How can I tell if a lower control arm bushing is worn?
Cracked or torn rubber, a clunk over bumps and uneven tire wear can be signs of a worn bushing or arm. A shop can check for play and alignment.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.