Dorman - OE Solutions Suspension Control Arm P/N:521-657
Dorman 521-502 rear right upper control arm for the 2007-2011 Mercedes-Benz CLS550 and other vehicles links the rear right wheel to the chassis and holds its position as the suspension moves. This Dorman OE Solutions control arm replaces a worn arm at that position.
A clunk over bumps, uneven tire wear or vague steering can mean this arm or its bushings are worn, though a worn ball joint or tie rod can be behind the same signs, so find the source first. This listing is one control arm for the rear right upper position, with one at each side of the axle. The left side is a separate part, and both sides are normally replaced together.
As a direct-replacement control arm, it fits the 2007-2011 Mercedes-Benz CLS550, the 2007-2011 Mercedes-Benz CLS63 AMG and the 2007-2011 Mercedes-Benz SL550. If your Mercedes-Benz is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with its rubber bushings. The ball joint, grease fitting and mounting hardware are not included, so plan on new bolts because the old ones may not be reusable.
Interchange: 102-6704 · 102-6705
TC1950 · CA4382 · 2CB10253 · RK620100 · FA3542 · 2303502806 · GS101103 · CMS101103 · 2606549 · JTC1460
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will Dorman 521-502 fit the 2007-2011 Mercedes-Benz CLS550?
Yes. Dorman 521-502 is listed for the 2007-2011 Mercedes-Benz CLS550 at the rear right upper position. For another model, look up your year and model in the "Vehicles it fits" section.
Does this Dorman control arm come with its bushings?
Yes, the rubber bushings are included with the arm. The ball joint, grease fitting and mounting hardware are not included and are bought separately.
Is this Dorman upper control arm made of aluminum?
Yes, the arm is aluminum with a powder-coated finish and rubber bushings. It is a casting/forged type.
Is the Dorman OE Solutions suspension control arm adjustable?
No, this control arm is not adjustable. Its end 2 is a press-in type, and the bushing measures 39.6 mm outside diameter and 14.3 mm inside diameter.
Does Dorman 521-502 cross to part number 2303502806?
Yes, 2303502806 is an interchange number for Dorman 521-502, the rear right upper control arm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.