Dorman - OE Solutions Suspension Control Arm P/N:521-869
Dorman 521-676 front right lower control arm for the 2004-2006 Toyota Tundra and other vehicles connects the front right wheel assembly to the vehicle and lets it move with the suspension.
A worn suspension control arm or bushing can show up as a clunk over bumps, a front end that wanders or pulls, or uneven tire wear. Other suspension parts can produce similar signs, so first look the arm and its bushings over with the vehicle parked, checking for cracks, bends and torn rubber, and leave anything that needs lifting to a shop.
As a lower control arm for the 2004-2006 Toyota Tundra and the 2004-2007 Toyota Sequoia, it is a direct replacement for them on the front right. This listing is one arm: both vehicles take one on the front right, while the front left is a separate part, and the two sides are normally replaced together.
Fit and size
Build and materials
One control arm with its rubber bushings. The ball joint, mounting hardware and grease fitting are not included, so plan on new mounting hardware, as the old pieces may not be reusable.
Interchange: 102-7574
TC6323 · CA14342 · 5CB80060 · RK640437 · FA3211 · GS86133 · CMS86133 · 2606210 · 1525050 · X50CA9991 · 4806834040
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is 521-676 the 2004-2006 Toyota Tundra lower control arm for the front right side?
Yes. Dorman 521-676 is the front right lower control arm for the 2004-2006 Toyota Tundra. The front left side is a separate part.
Does this 2004-2006 Toyota Tundra control arm also fit the 2004-2007 Toyota Sequoia?
Yes. Dorman 521-676 also fits the 2004-2007 Toyota Sequoia, in the same front right lower position.
Does this Dorman control arm come with bushings?
Yes, the package is one control arm with its rubber bushings; the ball joint, mounting hardware and grease fitting are not included.
What are the bushing sizes on this Dorman lower control arm?
The bushing inside diameter is 14.3 mm, the outside diameter is 39.6 mm and the length is 92 mm. The arm itself measures 262.5 mm long.
Is 102-7574 an interchange number for this lower control arm?
Yes. 102-7574 is on the interchange list for Dorman 521-676, along with TC6323 and CA14342.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.