Dorman - OE Solutions Suspension Control Arm P/N:524-732
Dorman 521-732 front right lower control arm for the 2007-2012 Hyundai Elantra locates the front right wheel as the suspension moves. This Dorman control arm pivots at its bushings, which also absorb road shock from the wheel.
A clunk over bumps, a wandering feel in the steering or uneven front tire wear can mean a worn control arm or bushing, but worn tie rods and strut mounts can give similar signs. Before replacing the arm, look with the engine off for cracked or torn bushing rubber where it is visible without lifting the vehicle, and leave play testing to a shop.
It is a direct replacement that fits and performs like the original equipment on the 2007-2012 Hyundai Elantra. This listing is one arm for the front right position, which takes one; the front left is a separate part, and the pair is normally replaced at the same time.
Fit and size
Build and materials
One control arm with its rubber bushings. The ball joint, mounting hardware and grease fitting are not included, so plan on new mounting bolts, since the old ones may not be reusable.
Interchange: 850-0338 · 102-6074 · 623.51825
TC2172 · CA12348 · 545012H000 · 545012H100 · 5CB90079 · 5CB90258 · RK641581 · GS901101 · GS90163 · CMS901101 · CMS90163 · 2606446 · 2608187 · SK521732 · X18CA1785 · JTC1394
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this 2007-2012 Hyundai Elantra control arm go on the front right?
Yes. Dorman 521-732 is the front right lower control arm for the 2007-2012 Hyundai Elantra. The front left side is a separate part.
Does the Dorman suspension control arm 521-732 come with bushings?
Yes. Dorman 521-732 includes rubber bushings. The ball joint, mounting hardware and grease fitting are not included.
What size are the bushings on the Dorman lower control arm?
The rubber bushing measures 39.6 mm outside diameter, 14.3 mm inside diameter and 92 mm long. The arm itself is 262.5 mm long.
How can I tell if a front control arm bushing is worn?
Cracked, split or hardened rubber at the bushing, a clunk over bumps, or uneven front tire wear can be signs. A shop can test for play and check the alignment.
Is 545012H000 interchangeable with Dorman 521-732?
Yes. 545012H000 is listed as an interchange number for Dorman 521-732, along with 545012H100 and the other numbers on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.