Dorman - OE Solutions Suspension Control Arm P/N:522-966
Keep the rear wheel held in its correct position as it travels over the road with this Dorman control arm, part number 521-966, a precision-engineered and rigorously tested replacement for the rear right upper rearward arm. It fits many vehicles, among them the 2009-2017 Chevrolet Traverse, 2007-2016 GMC Acadia and 2008-2017 Buick Enclave. See the Buyer's Guide tab for the full list.
Dorman designed this suspension control arm as a direct replacement that fits and performs like the original equipment on the listed applications. It installs at the rear right upper rearward location, where it connects the wheel end to the chassis and lets the wheel move up and down under control.
Signs this arm may need replacing include clunking or knocking from the rear over bumps, uneven tire wear, a wandering feel, or a bent or damaged arm. If a worn control arm is the cause, this part replaces it. Diagnose the suspension before ordering, and have the wheel alignment checked after installation.
Interchange: 800-679986
800679986 · TC5890 · CA6469 · 15148023 · 19433429 · 23347603 · 23461854 · 25788291 · RK641643 · GS501019 · CMS501019 · 2606538 · 4CB50161 · SK521966 · 1503078 · JTC2642
This part cross-references / interchanges with the following part numbers:
What does this control arm do?
It connects the wheel end to the chassis and lets the wheel move up and down while keeping it in position. The Dorman 521-966 serves the rear right upper rearward location.
Is this the right 2009-2017 Chevy Traverse control arm for the rear upper position?
It is listed for the 2009-2017 Chevrolet Traverse at the rear right upper rearward position. The Buyer's Guide tab shows every listed vehicle.
Does it fit the 2007-2016 GMC Acadia and 2008-2017 Buick Enclave?
Yes, it is listed for the 2007-2016 GMC Acadia and the 2008-2017 Buick Enclave. Use the Buyer's Guide tab to confirm your exact vehicle.
What are signs a rear upper control arm may be worn?
Common signs include clunking over bumps, uneven tire wear, a wandering feel, or a visibly bent arm. These symptoms can have other causes, so inspect the suspension first.
Should the vehicle be aligned after installing this arm?
Yes, a wheel alignment check is recommended after replacing a control arm. Follow the vehicle service information for torque values and whether the fasteners may be reused.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.