Dorman - OE Solutions Suspension Control Arm P/N:522-646
Dorman 522-187 front left lower control arm for the 1992-1995 Honda Civic and other vehicles links the front left wheel to the body. The arm lets the wheel move up and down over the road while holding its position.
A worn control arm can show up as a clunk over bumps, steering that wanders or uneven front tire wear. Those signs also have other possible sources, so with the engine off and the car parked, look at the rubber bushings and arm for cracks, tears or bends, and leave play checks to a shop, before you replace it.
This Dorman control arm is a direct replacement that fits and performs like the original on the 1992-1995 Honda Civic, the 1994-2001 Acura Integra and the 1993-1997 Honda Civic Del Sol. Control arms are normally replaced in left and right pairs; this listing is one arm for the front left, and the front right is a separate part. The 1992-1995 Honda Civic takes one lower control arm on this side.
Fit and size
Build and materials
One control arm with its bushings. The ball joint, grease fitting and mounting hardware are not included, so plan on new bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this control arm for the 1992-1995 Honda Civic also right for the 1993-1997 Honda Civic Del Sol?
Yes. Dorman 522-187 fits the 1993-1997 Honda Civic Del Sol as well as the 1992-1995 Honda Civic, in the front left lower position.
Is this lower control arm for the 1992-1995 Honda Civic a left or right side part?
It is the front left lower arm. The front right lower arm is a separate part, so a pair needs one of each.
Does this Dorman lower control arm come with bushings?
Yes. Dorman 522-187 includes rubber bushings. The ball joint, grease fitting and mounting hardware are not included.
Is this Dorman suspension control arm made of steel?
Yes. The arm is steel with a powder-coated finish and a casting/forged construction. Its bushings are rubber.
What size are the bushings on this control arm?
Dorman 522-187 lists a bushing length of 92 mm, an inside diameter of 14.3 mm and an outside diameter of 39.6 mm. The mounting holes are 269.8 mm apart.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.