Dorman - OE Solutions Suspension Control Arm P/N:522-361
Dorman 522-199 front left lower control arm for the 2006-2015 Lexus IS250 and other vehicles locates the wheel as the suspension moves. It is one of the Dorman control arms sold as a direct replacement.
Worn bushings or a bent arm can show up as clunking over bumps, a pull to one side or uneven tire wear. Before you replace this arm, rule out worn tires, a worn strut or a loose ball joint, which can produce similar clunks and pulls. A 2006-2015 Lexus IS250 takes one arm in this front left lower spot; the front right is its own part, ordered on its own, and the two are normally replaced together.
It is listed for a wide range of Lexus models, led by the 2006-2015 Lexus IS350 and the 2008-2014 Lexus IS F. For any other Lexus, look up your year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with its bushings. A ball joint, grease fitting and mounting hardware are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 102-8299
TC6744 · CA14547 · 5CB86268 · RK642162 · GS86175 · CMS86175 · 2606621 · SK522199 · 4864030290 · 4864053020 · 4864053030
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dorman 522-199 the front left lower control arm for a 2006-2015 Lexus IS250?
Yes. Dorman 522-199 is listed for the 2006-2015 Lexus IS250 in the front left lower position. The front right side is a separate part.
Are bushings included with the Dorman lower control arm 522-199?
Yes, bushings are included. This Dorman 522-199 arm does not include a ball joint, grease fitting or mounting hardware.
What is this Dorman suspension control arm made of?
The arm is boxed steel with a powder-coated finish, and its bushings are rubber.
What signs can a worn bushing in this front left lower control arm cause?
A worn bushing can cause clunking over bumps, a pull to one side or uneven tire wear. A shop can inspect the arm and bushings to confirm.
What size are the bushings on this front left lower control arm?
The bushing is 92 mm long, with a 14.3 mm inside diameter and a 39.6 mm outside diameter.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.