Dorman - OE Solutions Suspension Control Arm P/N:522-067
Replace a worn or damaged front corner link with the Dorman - OE Solutions 522-777, a 2002-2005 Honda Civic control arm cataloged for the front left lower position. It is a direct replacement for the 2002-2005 Honda Civic. It connects the wheel assembly to the chassis on the lower side of the left front suspension and helps hold the wheel in position as the suspension moves. See the Buyer's Guide tab for engine details.
Dorman engineers and tests this part to serve as a dependable replacement for the factory arm. Clunking over bumps, loose or wandering steering and uneven tire wear are signs this 2002-2005 Honda Civic lower control arm may need replacing. Diagnose the cause first, because these symptoms can come from other parts. If a worn original arm is the cause, this Dorman control arm replaces it. It fits the left side only. The right side is a separate part, and replacing both sides together is recommended when both are worn.
Interchange: 622.40820 · 623.40820
62240820 · 62340820 · TC6054 · CA12606 · 51360S5TA00 · 51360S5TA01 · 5CB60199 · RK642168 · GS601012 · CMS601012 · 2607585
This part cross-references / interchanges with the following part numbers:
Is this the right control arm for a 2005 Honda Civic?
It is listed for the 2002-2005 Honda Civic in the front left lower position, which includes 2005 models. See the Buyer's Guide tab for trim and engine details.
What does a suspension control arm do?
It connects the wheel assembly to the vehicle's chassis. It lets the wheel move up and down while helping hold it in position for steering and handling.
What signs suggest the control arm may need replacing?
Common signs include clunking over bumps, loose or wandering steering, vibration and uneven tire wear. These can have other causes, so have the suspension inspected first.
Which side of the vehicle does 522-777 fit?
It is cataloged for the front left lower position. The right side uses a different part, and replacing both sides together is recommended when both arms are worn.
Should the wheel alignment be checked after installing it?
Yes. Replacing a control arm can change suspension geometry, so have the alignment checked afterward. Follow the vehicle service information for fasteners and torque specs.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.