Dorman - OE Solutions Suspension Control Arm P/N:522-387
Help keep the rear wheels located and aligned with the Dorman - OE Solutions Suspension Control Arm / Lateral Arm, part number 522-798, a direct replacement for the 2003-2008 Honda Pilot, 1999-2004 Honda Odyssey and 2001-2006 Acura MDX. The catalog lists it for the rear lower forward position, and it fits both the left and right sides. See the "Vehicles it fits" section for engine-specific details.
This part is listed as both a suspension control arm and a lateral arm. It connects the rear wheel assembly to the vehicle and helps locate the wheel and hold rear alignment as the suspension moves. Dorman built it to replace the original equipment on the listed applications:
Signs this arm may need replacing include clunking or knocking from the rear over bumps, vague or wandering handling, uneven rear tire wear, or an arm bent from an impact. Other parts can cause these symptoms, so diagnose the cause before replacing. The arm is sold individually. Replacing the left and right arms together is recommended for even, balanced suspension, and a wheel alignment is recommended after installation.
Interchange: 102-7704
1027704 · TC7145 · CA5084 · 52345S0XA00 · 52345S0XA01 · 2CB60273 · RK642894 · GS601031 · CMS601031 · 2607598
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman 522-798 fit?
It is a direct replacement for the 2003-2008 Honda Pilot, 1999-2004 Honda Odyssey and 2001-2006 Acura MDX. Check the "Vehicles it fits" section for engine details.
What position does this arm install in?
The catalog lists it for the rear lower forward position on both the left and right sides. It is sold individually, and replacing both sides together is recommended.
What does a lateral arm do?
This part is also listed as a suspension control arm. It connects the rear wheel assembly to the vehicle and helps locate the wheel and hold alignment as the suspension moves.
What signs suggest this arm may need replacing?
Rear clunking over bumps, wandering handling, uneven tire wear or a visibly bent arm can come from a worn or damaged arm. Other parts can cause the same symptoms, so diagnose before replacing.
Do I need an alignment after installing it?
A wheel alignment is recommended after replacing a suspension arm. Consult the vehicle service information for the correct fasteners and torque values, and for whether the original fasteners may be reused.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.