Dorman - OE Solutions Suspension Control Arm P/N:524-463
Dorman 524-251 rear left lower control arm for the 2006-2008 Ford Fusion and other vehicles connects the rear wheel assembly to the body. This Dorman control arm, also called a suspension control arm, helps keep the wheel located as the suspension moves.
A worn rear lower control arm can show up as a clunk from the rear over bumps, uneven rear tire wear or a cracked bushing. Before you replace the arm, rule out a worn rear shock, a loose wheel bearing or a bent wheel as the source. Most shops replace the rear arms as a pair, so plan on the right side too; this listing is the rear left arm only.
As a lower control arm for the 2006-2008 Ford Fusion it is a direct replacement, and the vehicles it fits include the 2007-2008 Lincoln MKZ and the 2006-2008 Mercury Milan.
Fit and size
Build and materials
One rear left lower control arm with its rubber bushings. This listing holds one arm, and the rear left position takes one. The ball joint and mounting hardware are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: TC7272 · CA10478 · 6E5Z5A649AB · GS401105 · CMS401105 · 2607394 · 8CB40212
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this 2006-2008 Ford Fusion control arm the rear left or rear right one?
It is the rear left lower rearward arm. Dorman 524-251 is one arm for that side, and the rear right is a separate part.
Is Dorman 524-251 a control arm replacement for the 2006-2008 Ford Fusion, and does it fit other cars?
Yes, it is a direct replacement for the 2006-2008 Ford Fusion, and it fits more vehicles too. Look up your own car in the "Vehicles it fits" section to see whether it is covered.
Are the bushings included with this Dorman control arm?
Yes. Dorman 524-251 comes with its rubber bushings. The ball joint and mounting hardware are not included.
What size are the bushings on this rear lower control arm?
The bushing is 92 mm long, with a 39.6 mm outside diameter and a 14.3 mm inside diameter. The arm itself measures 262.5 mm in length.
How can I tell if a rear lower control arm or its bushings are worn?
Cracked or torn rubber bushings, a bent or rusted arm, a clunk from the rear over bumps or uneven rear tire wear can be signs of wear. A shop can confirm what is behind them.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.