Dorman 528-244 rear right lower control arm for the 2014-2018 Mazda 3 and other vehicles holds the rear wheel in place as the suspension moves. It is a direct replacement made to fit and perform like the original equipment.
- Part of the Dorman OE Solutions line, standard replacement grade
- Stamped steel arm with an E-coated finish for rust and corrosion resistance
- Rubber bushings included, 70 Shore A durometer, which saves time and labor
- Precision-engineered and rigorously tested for dependable fit
- 576 mm maximum length, equal to the distance between the bushings
Quick facts
- Part: Dorman 528-244 control arm
- Also called: suspension control arm
- Fits: 2014-2018 Mazda 3 and other vehicles
- Position: Rear right lower rearward
- Material: Steel
- Condition: New
Worn bushings or a bent arm can show up as clunking over bumps, uneven tire wear or the car pulling to one side. Before you replace the arm, rule out tire wear, a bent wheel or other worn suspension parts, which can produce similar noises and pulling.
Fits
This control arm fits the 2014-2018 Mazda 3 and the 2014-2018 Mazda 3 Sport as a direct replacement.
Specifications
Fit and size
- Position: rear right lower rearward
- Quantity per vehicle: 1 for this side
- Control arm maximum length: 576 mm
- Distance between bushings: 576 mm
- Bushing inside diameter: 12.3 mm
- Bushing length: 49.5 mm
Build and materials
- Construction: stamped
- Material: steel
- Finish: E-coated
- Bushing material: rubber, 70 Shore A durometer
- Bushings: included
- Grade: standard replacement
- Condition: new
- Country of origin: Turkey
In the box
One control arm with its bushings. The ball joint, mounting hardware, grease fitting, castle nut and cotter pin are not included, so plan on new fasteners because the old ones may not be reusable. This listing is one arm for the rear right; this side takes one, and the rear left is a separate part ordered separately, with both sides normally replaced together.
Interchange: TC8077 · CA14978 · 5CB76173 · RK643891 · B45A28300 · B45A28300A · B45A28300C · BJS728300 · BJS728300B · BJS728300C · GS761210 · CMS761210 · 2608628 · X32LA0062
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
TC8077, CA14978, 5CB76173, RK643891, B45A28300, B45A28300A, B45A28300C, BJS728300, BJS728300B, BJS728300C, GS761210, CMS761210, 2608628, X32LA0062
Frequently Asked Questions
Does Dorman 528-244 fit the 2014-2018 Mazda 3 Sport?
Yes. Dorman 528-244 is a rear right lower control arm for the 2014-2018 Mazda 3 Sport, and that side takes one.
Does the Dorman lower control arm come with bushings?
Yes. The listing is one control arm with its bushings. The ball joint, mounting hardware, grease fitting, castle nut and cotter pin are not included.
What is this Dorman control arm made of?
Dorman 528-244 is a stamped steel arm with an E-coated finish. Its rubber bushings are 70 Shore A durometer.
How can I tell if a Dorman suspension control arm is worn?
Cracked or torn bushing rubber, clunking over bumps or uneven tire wear can be signs of a worn arm. A shop can inspect the arm and its bushings on a lift.
What is the maximum length of this control arm?
The maximum length is 576 mm, the same as the distance between the bushings. The bushing inside diameter is 12.3 mm and the bushing length is 49.5 mm.
