Dorman 541-080 front suspension kit for the 1998-2012 Ford Ranger and other vehicles replaces the upper control arms and ball joints on both sides of the front end. The Dorman suspension kit is application-specific, engineered for factory-like feel and performance.
- Left and right upper control arms and upper ball joints in one kit
- Extended-life components with low-friction polymer bearings
- Synthetic grease for a long service life
- Rubber bushings included in the kit
- Tested for try-on fit, corrosion and materials
- Part of the Dorman OE Solutions line
Quick facts
- Part: Dorman 541-080 suspension kit
- Fits: the 1998-2012 Ford Ranger and other vehicles
- Position: Front
- Material: Rubber (bushings)
- Condition: New
A clunk over bumps, loose-feeling steering or uneven front tire wear can mean worn arm bushings or ball joints. These signs alone do not prove this kit is the problem, since a worn tie rod end or tire can feel much the same. The kit supplies one upper control arm and one upper ball joint for each side of the front axle.
Fits
This kit is listed for a wide range of Ford, Mazda and Mercury models, including the 1998-2012 Ford Ranger, the 1995-2001 Ford Explorer and the 1998-2010 Mazda B4000.
Specifications
Fit and size
- Position: Front
- Bushing inside diameter: 13.6 mm
- Bushing outside diameter: 38.7 mm
Build and materials
- Grade: Standard replacement
- Bushing material: Rubber
- Bushings: Included
- Condition: New
- Country of origin: India
In the box
Two upper control arms and two upper ball joints, with bushings. Coil springs, shocks and link bolts are not included, so plan on new link bolts rather than reusing the old ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Dorman 541-080 a Ford Ranger suspension kit for 1998-2012 trucks?
Yes. Dorman 541-080 fits the 1998-2012 Ford Ranger. If your truck is another model, look it up in the "Vehicles it fits" section on this page.
Does this kit include the upper control arms and ball joints for both sides?
Yes. Dorman 541-080 has two upper control arms and two upper ball joints, with bushings. Coil springs, shocks and link bolts are not included.
What size are the bushings in kit 541-080?
The bushings are rubber, with a 13.6 mm inside diameter and a 38.7 mm outside diameter.
Which signs suggest the upper ball joints or control arms may be worn?
A clunk over bumps, loose-feeling steering or uneven front tire wear can point to worn arm bushings or ball joints. A shop can test the joints safely and tell you whether they need replacing.
Is 541-080 a Ford Explorer suspension kit for 1995-2001 models?
Yes. Dorman 541-080 front suspension kit is listed for the 1995-2001 Ford Explorer, with one upper control arm and one upper ball joint per side.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review