Dorman 541-087 front suspension kit for the 2006-2011 Ford Crown Victoria and other vehicles replaces the worn front-end joints, arms and links on both sides. The Dorman suspension kit is sold as a single kit that holds the parts for each side.
- Extended-life front-end kit from the Dorman OE Solutions line
- Low-friction polymer bearings and synthetic grease for a long service life
- Application-specific engineering for factory-like feel and performance on specific vehicles
- Try-on, corrosion and material testing for a quality fit and durability
- Standard replacement grade
Quick facts
- Part: Dorman 541-087 suspension kit
- Fits: 2006-2011 Ford Crown Victoria and other vehicles
- Position: Front
- Condition: New
Clunking over bumps, loose or wandering steering and uneven front tire wear can mean worn front-end joints. Before you replace the kit, rule out tire condition, alignment and worn shocks as the source, since each can give you a similar feel behind the wheel.
Fits
This front suspension kit is a direct-fit replacement for the 2006-2011 Ford Crown Victoria, the 2006-2011 Lincoln Town Car and the 2006-2011 Mercury Grand Marquis.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1 kit
Build and materials
- Grade: Standard replacement
- Bearings: Low-friction polymer
- Grease: Synthetic
- Condition: New
- Country of origin: Taiwan
In the box
This listing is one kit for both sides of the front end, and each vehicle takes one kit. It holds 2 upper control arms, 2 ball joints, 2 outer tie rod ends, 2 inner tie rod ends and 2 stabilizer bar links. Link bolts, bushings, coil springs, shocks, strut mount insulators and coil spring insulators are not included, so plan on new link bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this suspension kit right for the 2006-2011 Mercury Grand Marquis?
Yes. Dorman 541-087 is a front suspension kit listed for the 2006-2011 Mercury Grand Marquis, and it covers the left and right sides of the front end.
Does this suspension kit come with link bolts or shocks?
No. Link bolts, shocks and coil springs are not included; Dorman 541-087 holds 2 upper control arms, 2 ball joints, 2 outer and 2 inner tie rod ends and 2 stabilizer bar links.
What bearings and grease does this suspension kit use?
It uses low-friction polymer bearings and synthetic grease, chosen for a long service life. The kit is a standard replacement grade.
How can I tell if front tie rod ends and ball joints are wearing out?
Signs can include clunking over bumps, loose or wandering steering and uneven tire wear. A shop can check the joints for play and torn boots safely.
What testing has this suspension kit been through?
Dorman 541-087 has had try-on, corrosion and material testing to support a quality fit and durability.
