Dorman - OE Solutions Suspension Stabilizer Bar Bushing P/N:540-449
Dorman 540-773 front stabilizer bar bushing for the 2001-2005 Buick LeSabre and other vehicles holds the stabilizer bar to the frame and helps cut vibration and clunking.
A worn suspension stabilizer bar bushing can show up as a clunk or rattle over bumps, or as vibration from the front of the car. End links, control arm bushings and struts can also be behind those noises, so track down the actual source before you buy. If the bushings are the cause, this kit replaces them.
This kit is a direct replacement for the cars it fits and is listed for a wide range of Buick, Pontiac, Cadillac and Oldsmobile models, led by the 2001-2005 Buick LeSabre, the 1997-2005 Buick Park Avenue and the 2000-2005 Pontiac Bonneville. The fitment calls for one kit per vehicle, and each kit holds two bushings. If your car is not named here, find it in the "Vehicles it fits" section.
Fit and size
Build and materials
Two stabilizer bar bushings. Mounting hardware and brackets are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 25699778 · K201320 · GK201320 · MK201320
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 540-773 stabilizer bar bushing kit fit a 1997-2005 Buick Park Avenue?
Yes, Dorman 540-773 is listed for the 1997-2005 Buick Park Avenue, the 2001-2005 Buick LeSabre and the 2000-2005 Pontiac Bonneville; other models are in the "Vehicles it fits" section.
Does this Dorman stabilizer bar bushing kit come with bolts or brackets?
No. Dorman 540-773 is two rubber bushings, and mounting hardware and brackets are not included; plan on new bolts, since the old ones may not be reusable.
What inside and outside diameter do these stabilizer bar bushings have?
The bushings have a 24 mm inside diameter, a 37 mm outside diameter and a 13 mm wall thickness. The listed bar diameter is 23 mm.
What noises can a worn stabilizer bar bushing make?
A worn bushing can let the stabilizer bar clunk or rattle over bumps, and it can add vibration from the front of the car.
What is the Dorman 540-773 bushing made of, and where is it made?
The Dorman 540-773 bushings are made of rubber, and the country of origin is Taiwan.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.