Reconnect your rear stabilizer bar to the suspension with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-362, a direct-fit rear replacement for the 2007-2015 Mazda CX-9 (all engines). The sway bar link ties the rear stabilizer bar to the suspension so it can resist body roll through turns; as it wears you may notice clunking or rattling from the rear suspension over bumps and looser, sloppier handling. If a worn link is the cause, this kit replaces it.
- Direct fit: engineered to install like the original rear link on the 2007-2015 Mazda CX-9.
- Steel construction: finished with a coating for rust and corrosion resistance.
- Threaded ends: male-threaded at both ends, 10 mm attachment size, 1.5 mm thread pitch, 100 mm overall length.
- Serviceable design: greaseable through a grease fitting, with polymer bearings and a dust boot; includes 2 locking nuts.
This link is not adjustable and is not pre-greased. Bushings, bolts, washers, a sleeve, and a spacer are not included. Each listing supplies one link with 2 nuts; the 2007-2015 Mazda CX-9 uses two rear links per axle, and replacing both sides together as a matched pair is recommended. Country of origin: China.
Interchange: 101-5743 · 606.61024
1015743 · 60661024 · 45G20736 · 46G20736A · TC2649 · K750184 · L20628170 · L20628170A · SL853 · GS76831 · MS40823 · MS76831 · 2113006 · JTS554
This part cross-references / interchanges with the following part numbers:
45G20736, 46G20736A, 101-5743, 606.61024, TC2649, K750184, L20628170, L20628170A, SL853, GS76831, MS40823, MS76831, 2113006, JTS554
Frequently Asked Questions
What vehicles does the 542-362 kit fit?
It's a direct-fit rear stabilizer bar link kit for the 2007-2015 Mazda CX-9 (all engines). Each listing is one link, and this application uses two, so replacing both together as a rear pair is recommended.
Is this a front or rear link?
This is a rear suspension sway bar link.
What comes in the kit?
One link with two locking nuts, plus polymer bearings, a dust boot, and a grease fitting. Bushings, bolts, washers, a sleeve, and a spacer are not included.
Is the link greaseable?
Yes. It includes a grease fitting so grease can be added during service. It is not pre-greased and is not adjustable.
What are signs my sway bar link may need replacing?
Clunking or rattling from the rear suspension over bumps and looser handling in turns can point to a worn link. Diagnose the cause before replacing, since other suspension parts can produce similar symptoms.
