Keep the rear stabilizer bar working with the suspension and help control body sway with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-375. This sway bar link connects the rear stabilizer bar to the suspension, and it's a direct replacement engineered to match the design and dimensions of the original on many vehicles, among them the 2001-2005 Dodge Stratus, 2001-2006 Chrysler Cirrus and 2001-2005 Chrysler Sebring — see the "Vehicles it fits" section for the full list.
- Steel construction: built with a coated finish for rust and corrosion resistance.
- Greaseable: includes a grease fitting so it can be re-greased in service; runs on polymer bearings with a dust boot.
- Male-threaded ends: 10 mm end attachment size, 1.5 mm thread pitch, and a 61 mm length.
- Hardware: two locking nuts are included; bushings, washers, bolts, sleeves and spacers are not.
Worn links can produce clunking or rattling from the suspension over bumps and during cornering. This kit supplies one link and two locking nuts; the listed applications use two, and replacing both sides together is recommended. Country of origin: China.
Interchange: 101-5265 · 606.46003
1015265 · 60646003 · 45G20580 · 46G20580A · TC1584 · 18376 · K200262 · K7432 · SL674 · GK7432 · MK7432 · MS80854 · 4056A019 · MB631890 · MR131732 · MR333762 · R131732 · 2115003 · JTS891
This part cross-references / interchanges with the following part numbers:
45G20580, 46G20580A, 101-5265, 606.46003, TC1584, 18376, K200262, K7432, SL674, GK7432, MK7432, MS80854, 4056A019, MB631890, MR131732, MR333762, R131732, 2115003, JTS891
Frequently Asked Questions
What does this stabilizer bar link kit do?
It connects the rear stabilizer (sway) bar to the suspension, helping the bar control body sway and keep the wheels working together. Replacing a worn link can address clunking or rattling if the link is the cause.
Which vehicles does the 542-375 fit?
It's a direct-fit replacement for many vehicles, among them the 2001-2005 Dodge Stratus, 2001-2006 Chrysler Cirrus and 2001-2005 Chrysler Sebring. See the "Vehicles it fits" section for the full list.
Is this a front or rear part?
It's for the rear suspension on the listed applications.
How many do I need, and what's in the kit?
Each kit supplies one link and two locking nuts. The listed vehicles use two links, and replacing both sides together is recommended.
Can this link be greased?
Yes. It includes a grease fitting so it can be re-greased during service, and it uses polymer bearings with a dust boot.
