Dorman - OE Solutions Suspension Stabilizer Bar Link Kit P/N:542-465
$32.99
(You save)
Curb the front-end clunks and body roll of a worn sway bar link with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit (542-465) — a direct-fit Subaru Forester stabilizer bar link kit that ties the front stabilizer bar to the suspension. It's cataloged for the front position on the 2006-2007 Subaru B9 Tribeca, 2008-2014 Subaru Tribeca, 2010-2014 Subaru Outback, 2013-2016 Subaru XV, 2013-2015 Subaru XV Crosstrek, 2014-2018 Subaru Forester, 2015-2021 Subaru WRX, 2015-2021 Subaru WRX STI, and 2016-2017 Subaru Crosstrek [All engines]. If failed links are the source of knocking over bumps or loose-feeling handling, this replaces them.
Steel construction: a 340 mm steel link with a coated finish for rust and corrosion resistance.
Threaded ends: both ends are threaded with a 14 mm attachment size and a 1.5 mm thread pitch.
Serviceable, complete install: greaseable with a grease fitting and polymer bearings, plus a dust boot, locking nuts and mounting hardware. Washers, bushings, bolts, a sleeve and a spacer are not included, and it does not ship pre-greased.
Standard replacement: engineered to the design and dimensions of the original links for a direct-fit replacement on the listed applications.
Sold individually as one link; the listed Subaru applications use two, so order 2 and replace both sides as a matched pair for balanced handling. Country of origin: Thailand.
Yes — it's a direct-fit front stabilizer bar link kit for the 2014-2018 Subaru Forester, and it also fits the Outback, WRX, WRX STI, Tribeca, B9 Tribeca, XV and Crosstrek. See the Buyer's Guide tab for the full list.
How many links do I need?
The kit is sold as one link, but the listed Subaru applications use two. Order 2 to replace both sides, and it's best to replace them as a matched pair for balanced handling.
What is included with each link?
Each link includes polymer bearings, a dust boot, a grease fitting, locking nuts and mounting hardware. Washers, bushings, bolts, a sleeve and a spacer are not included.
Is this link greaseable?
Yes. It has a greaseable design with a grease fitting, though it does not ship pre-greased.
What are the signs of a worn sway bar link?
Common signs include clunking or rattling over bumps, knocking when turning, and looser-feeling handling. Diagnose the cause first, since other worn suspension parts can produce similar symptoms.
Write a Review
Dorman - OE Solutions
Dorman - OE Solutions Suspension Stabilizer Bar Link Kit P/N:542-465
Help keep your Sienna's front end composed through turns with the Dorman OE Solutions Sway Bar Link Kit, part number 542-542. It is a direct-fit front replacement for the 2011-2020 Toyota Sienna. It...
Suspension Stabilizer Bar Link KitThis suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles...
Tie the rear stabilizer bar to the suspension and help limit body roll with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-445. This rear-suspension direct-fit replacement drops in...
Keep the front stabilizer bar tied firmly to the suspension with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit, MPN 542-713. This front sway bar link kit drops in as a direct-fit...
Reconnect your front sway bar to the suspension and address the clunks and rattles a worn link can cause with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-126. This front...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
