Dorman - OE Solutions Suspension Trailing Arm P/N:521-912
Dorman 521-888 rear lower control arm for the 2002-2009 Chevrolet Trailblazer and other vehicles connects the rear axle to the frame and controls axle movement. Also called a suspension control arm, it is a trailing arm for the rear suspension.
A worn rear control arm can show up as a clunk over bumps, uneven rear tire wear or a loose, wandering feel at the back of the vehicle. Those signs alone do not prove this arm is the problem, since a worn shock can cause similar symptoms. This listing is one arm. Each rear side of the 2002-2009 Chevrolet Trailblazer takes one, and both sides are normally replaced together.
This rear lower control arm is a direct replacement for the original part on the 2002-2009 Chevrolet Trailblazer, the 2002-2009 GMC Envoy and the 2005-2009 Saab 9-7X, among other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One control arm with its rubber bushings. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new bolts, as the old ones may not be reusable.
Interchange: TC5980 · CA2171 · 15069840 · 15070038 · 15070039 · 15098154 · RK660157 · DS2019 · GS501014 · CMS501014 · 2606461 · 13CB50156 · SK521888 · JTC2645
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Trailblazer control arm fit the 2002-2009 Chevrolet Trailblazer?
Yes. Dorman 521-888 is listed for the 2002-2009 Chevrolet Trailblazer, the 2002-2009 GMC Envoy and the 2005-2009 Saab 9-7X. Open the "Vehicles it fits" section for your exact model and engine.
Is this a 2002-2009 Trailblazer lower control arm for the left or right side?
Dorman 521-888 is catalogued for both the rear left lower and rear right lower positions. The listing is one arm, so each side takes its own.
Does this Dorman lower control arm come with bushings?
Yes. Dorman 521-888 includes rubber bushings. A ball joint, a grease fitting and mounting hardware are not included.
What is this Dorman control arm made of and how is it finished?
This rear lower control arm is steel with a powder-coated finish and rubber bushings. It measures 262.5 mm in length with a 14.6 mm mounting hole diameter.
How can I tell if a rear lower control arm is worn?
A clunk over bumps, uneven rear tire wear or a loose, wandering feel at the back can mean a worn rear suspension part. A shop can inspect the arm and its rubber bushings, so have it checked promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.