Dorman - OE Solutions Suspension Trailing Arm P/N:526-192
Dorman 526-452 rear left trailing arm for the 2014-2017 Mazda 6 links the rear suspension to the body and helps locate the rear wheel. This Dorman trailing arm replaces the original when it is worn, bent or damaged.
A worn arm or bushing can show up as a clunk from the rear suspension, uneven rear tire wear or a loose feel at the rear in corners. Worn rear shocks, springs or other bushings, or a bad wheel bearing, can be behind these signs too, so find the cause before buying.
It is a direct replacement for the 2014-2017 Mazda 6, which takes one arm on the rear left. This listing is one arm; the rear right is its own part, and both sides are normally replaced together.
Fit and size
Build and materials
One rear left trailing arm with its bushing. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 9CB76158 · G46E28250A · G46E28250B · G46E28250C · G46E28250D · GHP928250B · GS761218 · CMS761218
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 526-452 rear left trailing arm right for the 2014-2017 Mazda 6?
Yes, Dorman 526-452 is the rear left trailing arm for the 2014-2017 Mazda 6, which takes one on that side; the rear right arm is a separate part.
Which parts come with the Dorman 526-452 trailing arm?
Dorman 526-452 is one rear left arm with its bushing. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new bolts.
What size are the mounting holes on this suspension trailing arm?
The mounting holes measure 18.5 mm, 14.5 mm and 15 mm, and the arm is 380 mm long. It attaches with a bushing at one end and a bracket at the other.
Does the Dorman 526-452 trailing arm replace part number G46E28250A?
Yes, G46E28250A is one of the interchange numbers listed for Dorman 526-452, a rear left trailing arm.
Is this trailing arm steel, and does it have a coated finish?
Yes. It is a stamped steel arm with a coated finish, and its bushing is made of rubber and steel.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.