Dorman 527-040 rear right trailing arm for the 2015-2017 Chrysler 200 holds the rear wheel in position as the suspension moves. This Dorman trailing arm is a stamped steel design made as a direct replacement for the original part.
- Stamped steel construction
- Coated finish for corrosion resistance
- Bracket at each end with bolt-on attachment
- Quality tested for proper performance
Quick facts
- Part: Dorman 527-040 trailing arm
- Also called: suspension trailing arm
- Fits: 2015-2017 Chrysler 200
- Position: Rear right
- Material: Steel
- Condition: New
A worn suspension trailing arm can show up as a clunk from the rear, uneven rear tire wear, or an arm that looks bent, cracked or rusted. Before you replace this arm, rule out worn bushings and loose mounting bolts, since they can produce similar noises at the rear of the car.
Fits
It fits the 2015-2017 Chrysler 200, which takes one for the rear right. The rear left is a separate part ordered on its own, and both sides are normally replaced together.
Specifications
Fit and size
- Position: rear right
- Quantity per vehicle: 1
- Length: 355 mm
- Mounting hole diameters: 14.5 mm, 12.3 mm, 14 mm, 18 mm
Build and materials
- Material: steel
- Construction: stamped
- Finish: coated
- Attachment: bolt on, with a bracket at each end
- Grade: standard replacement
- Condition: new
- Country of origin: Taiwan
In the box
One trailing arm. Mounting hardware and bushings are not included; plan on new bolts, as the old ones may not be reusable.
Interchange: 68175510AA · 68175510AB · 68175510AC · 68175510AD · CA8997 · GS251230 · CMS251230 · 6CB25355
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
68175510AA, 68175510AB, 68175510AC, 68175510AD, CA8997, GS251230, CMS251230, 6CB25355
Frequently Asked Questions
Does the Dorman 527-040 rear right trailing arm fit the 2015-2017 Chrysler 200?
Yes. Dorman 527-040 is the rear right trailing arm for the 2015-2017 Chrysler 200.
Do bushings and bolts come with this rear right trailing arm?
No. The box holds one trailing arm only. Mounting hardware, bushings, a ball joint and a grease fitting are not included.
What is the 527-040 trailing arm made of, and how does it attach?
This Dorman 527-040 is a stamped steel arm with a coated finish. It bolts on and has a bracket at each end.
How can I tell if a rear trailing arm is worn or bent?
A clunk from the rear, uneven rear tire wear, or an arm that looks bent, cracked or rusted can mean it is worn. A shop can inspect the rear suspension safely.
Is 68175510AA the same as the Dorman 527-040 trailing arm?
Yes. 68175510AA is one of the other numbers that Dorman 527-040 replaces, so it can be used to cross-reference this arm.
