Dorman - OE Solutions Transfer Case Encoder Ring P/N:600-120
Dorman 699-997 transfer case encoder ring for the 2011-2021 Jeep Grand Cherokee and other vehicles replaces the encoder ring on the 4WD transfer case motor.
A 4WD warning light, or a shift between 2WD and 4WD that never finishes, can mean the encoder ring has failed. These signs alone do not prove the ring is the problem, since a faulty transfer case motor could produce them as well.
This ring fits the 2011-2021 Jeep Grand Cherokee and the 2011-2021 Dodge Durango, and each takes one. The listing is a single ring.
Fit and size
Build and materials
One transfer case encoder ring.
Interchange: 68071234AA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 699-997 encoder ring right for the 2011-2021 Dodge Durango?
Yes. Dorman 699-997 fits the 2011-2021 Dodge Durango, and the 2011-2021 Jeep Grand Cherokee takes the same ring.
Does this transfer case encoder ring come with the 4WD motor?
No. The listing is one transfer case encoder ring only, and the motor is not included.
What size is the Dorman 699-997 transfer case encoder ring?
Inside and outside diameter are both 69.5 mm, and the ring is 9.5 mm thick. It has a plastic housing and three pin terminals.
What are the signs of a bad 4WD transfer case encoder ring?
A 4WD light on the dash, or a shift between 2WD and 4WD that never completes, can be signs. A shop can test the system with a scan tool.
Does 68071234AA cross to this Dorman encoder ring?
Yes. 68071234AA is listed as an interchange number for Dorman 699-997, so either number finds this ring.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.