Dorman - OE Solutions Engine Harmonic Balancer P/N:594-744
Dorman 594-391 harmonic balancer for the 1996 Ford F-150 6-cylinder 4.9L and other vehicles takes up vibration at the crankshaft. This direct-replacement assembly is also called an engine harmonic balancer.
Cracked or separated rubber, an outer ring that has shifted on the hub, or engine vibration can mean the balancer is worn. With the engine off and cool, you can look at the rubber for cracks; a shop can test anything that needs the engine running. Other causes can produce belt noise and vibration, so find the cause before replacing the part.
The 1996 Ford F-150 6-cylinder 4.9L, the 1996 Ford F-250 6-cylinder 4.9L and the 1996 Ford E-150 Econoline 6-cylinder 4.9L take this balancer, along with other vehicles. The 1996 Ford F-250 6-cylinder 4.9L takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One harmonic balancer. The center bolt, the bolt and washer and the mounting hardware are not included, so plan on new bolts.
Interchange: 49252767248045129 · 102103 · PB1496N · F6UZ6316A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Dorman 594-391 work as a Ford F-150 harmonic balancer on a 1996 Ford F-150 6-cylinder 4.9L?
Yes. Dorman 594-391 is listed for the 1996 Ford F-150 6-cylinder 4.9L. For another model or engine, open the "Vehicles it fits" section.
Does the Dorman 594-391 harmonic balancer come with the center bolt?
No. Dorman 594-391 is one harmonic balancer; the center bolt, the bolt and washer and the mounting hardware are not included, so plan on new bolts.
How big is this harmonic balancer, and how many belt grooves does it have?
This cast iron balancer measures 175.5 mm outside diameter, 34.9 mm inside diameter and 72.5 mm deep. It has 6 pulley grooves for a serpentine belt.
What can a worn rubber bond on this harmonic balancer look like?
Cracked or separated rubber, or an outer ring that has shifted on the hub, can mean the bond is worn. Look with the engine off and cool; a shop can test it while running.
Does the Dorman OE Solutions harmonic balancer have a keyway and degree markings?
Yes. This balancer has both a keyway and degree markings.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.