Reseal the water pump mounting joint and keep coolant flowing through the pump instead of weeping past the mating surface with the FEL-PRO Engine Water Pump Gasket 35066. This paper gasket installs between the water pump and the engine across a wide range of V8 Ford applications, including the 1970-1977 and 1980-1985 Ford Bronco [V8-5.0L], 1975-1985 Ford F-150 [V8-5.0L], the 1970-1972 DeTomaso Mangusta [V8-5.0L] and 1971-1974 Pantera [V8-5.8L], plus Ford Country Sedan, Custom, F-100/F-250 and E-100/E-150/E-250/E-350 Econoline models running the V8-5.0L, V8-5.8L or V8-6.6L. See the Buyer's Guide tab for the full list of 153 applications.
Application-specific design: validated for fit, form, and function on these Ford water pumps.
Paper construction: a blue paper gasket measuring 0.030 in thick with 15 mounting holes.
Built for real-world repairs: made with proprietary materials designed to seal even imperfect surfaces.
OE-level sealing: premium-grade gasket that meets or exceeds original equipment specifications.
The gasket seals the joint between the water pump and the engine so coolant stays in the cooling passages. Signs it may need replacing include coolant seepage, crusty residue, or drips at the water pump; if a failed water pump gasket is the source of your leak, this replaces it. Best practice is to fit a fresh gasket whenever the water pump is removed. Country of origin: United States.
Manufacturer part number 35066.
This part cross-references / interchanges with the following part numbers:
It seals the joint between the water pump and the engine, keeping coolant inside the cooling passages instead of leaking past the mating surface.
What vehicles does it fit?
It fits many V8 Ford applications such as the Bronco, F-100, F-150, F-250 and E-series Econoline with the V8-5.0L, V8-5.8L or V8-6.6L, plus DeTomaso Mangusta and Pantera. See the Buyer's Guide tab.
What is the gasket made of?
It is a blue paper gasket, 0.030 in thick, with 15 mounting holes, made from Fel-Pro's proprietary materials designed to seal imperfect surfaces.
When should I replace the water pump gasket?
Signs include coolant seepage, residue, or drips at the water pump. Fit a fresh gasket whenever the water pump is removed.
Where is it made?
Country of origin: United States. It is a premium-grade gasket that meets or exceeds original equipment specifications.
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured...
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured...
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured...
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured...
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
