GMB 146-1240 water pump for the 2003-2006 Kia Sorento V6 3.5L circulates coolant through the engine to carry heat away. It is designed to match OE coolant flow rate and pressure, and it is built to OE-level specifications.
- Factory tested 100% for leakage and dimensional precision
- Bearing tested for noise and durability
- Aluminum casting with a metal impeller
- Timing-belt pulley and mounting hardware come with the pump
Quick facts
- Part: GMB 146-1240 water pump
- Also called: engine water pump
- Fits: 2003-2006 Kia Sorento V6 3.5L
- Material: Aluminum casting, metal impeller
- Condition: New
A coolant leak at the pump, a whine or grinding from the bearing, or an engine that runs hot can mean the water pump is wearing out. A leaking hose, a stuck thermostat or a weak radiator cap can be behind those signs too, so find the cause before you buy a pump.
Fits
As a water pump for the 2003-2006 Kia Sorento V6 3.5L, it is a direct-fit replacement, and the engine takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Hub height: 2.060 in
- Pulley: timing belt type, included
- Gaskets or seals: 3
Build and materials
- Casting material: aluminum
- Impeller material: metal
- Impeller rotation: reverse
- Gasket material: paper
- Condition: New
- Country of origin: China
In the box
One water pump with housing, a timing-belt pulley, three gaskets or seals and mounting hardware. Bolts, a bracket, a sensor, a thermostat, a fan clutch and a back housing are not included, and the old bolts may not be reusable, so plan on new ones.
Installation notes
- An instruction sheet comes with the pump for the steps.
- The required hardware is supplied to make installation easier.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this a water pump replacement for the 2003-2006 Kia Sorento V6 3.5L?
Yes. GMB 146-1240 is a direct-fit water pump for the 2003-2006 Kia Sorento V6 3.5L, and that engine takes one pump.
Does the GMB engine water pump come with the pulley and gaskets?
Yes. GMB 146-1240 includes a timing-belt pulley, three gaskets or seals, mounting hardware and an instruction sheet. Bolts, a bracket, a sensor and a thermostat are not included.
What material is the casting on this water pump?
The pump body is an aluminum casting with a metal impeller. The impeller has reverse rotation, and the gaskets are paper.
How can I tell if a water pump bearing is going bad?
A whine or grinding from the pump area, or coolant residue around the pump seen with the engine off and cool, can mean a worn bearing or seal. A shop can test it properly.
How is this GMB water pump tested?
Every pump gets a factory check for leakage and dimensional precision, and the bearing is tested for noise and durability.
