FEL-PRO Engine Water Pump Gasket P/N:35584
FEL-PRO 35457 water pump gasket for the 1995 Kia Sportage 4-cylinder 2.0L and other vehicles seals the water pump to the engine. This FEL-PRO water pump gasket, also called an engine water pump gasket, is made for the inlet position.
Coolant seeping from the water pump joint, or dried coolant residue around it, can mean the gasket has failed. These signs alone do not prove this gasket is the problem; a leaking hose nearby can look the same.
The vehicles this gasket fits include the 1990-1993 Mazda Miata 4-cylinder 1.6L, the 1994-1997 Miata 4-cylinder 1.8L, the 1990-1998 Mazda Protege 4-cylinder 1.8L, the 1995-1998 Protege 4-cylinder 1.5L and the 1999-2003 Protege 4-cylinder 1.6L, with one gasket per engine. If your car is not named here, find its year and engine in the “Vehicles it fits” section. It meets or exceeds all original equipment specifications.
Fit and size
Build and materials
Interchange: 121821 · 122371 · 12182 · 12237 · E7GZ8A531A · E8GY8A531A · E9JY8A531A · F4BZ8A531A · OK24A1501Y · K27625 · K30740 · K31753 · 702019 · B62115165 · F80115165 · WP9477 · 711558400
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Miata water pump gasket FEL-PRO 35457 right for the 1994-1997 Mazda Miata 4-cylinder 1.8L?
Yes, FEL-PRO 35457 fits the 1994-1997 Mazda Miata 4-cylinder 1.8L and the 1990-1993 Miata 4-cylinder 1.6L; for other cars, find the year and engine in the “Vehicles it fits” section.
Will this gasket work on a 1999-2003 Mazda Protege 4-cylinder 1.6L?
Yes. FEL-PRO 35457 fits the 1999-2003 Mazda Protege 4-cylinder 1.6L, the 1995-1998 Protege 4-cylinder 1.5L and the 1990-1998 Protege 4-cylinder 1.8L.
What are the inside diameter and thickness of this water pump gasket?
FEL-PRO 35457 has a 1.680 in inside diameter and is 0.045 in thick. It has two mounting holes, each 0.360 in in diameter.
Where would I see a coolant leak if this gasket fails?
Look for coolant seepage or dried coolant residue at the joint where the water pump meets the engine. Check only with the engine off and cool.
Is FEL-PRO 35457 an inlet water pump gasket?
Yes. FEL-PRO 35457 is made for the inlet position, and each listing is one gasket.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.