FEL-PRO Carburetor Mounting Gasket P/N:60111
Help keep the base of your carburetor sealed against vacuum leaks with the FEL-PRO carburetor mounting gasket, part number 13834, which seals the joint between the carburetor and the intake manifold. It fits many classic vehicles, among them the 1961 Chevrolet Impala 5.7L, 1964-1967 Pontiac Bonneville 6.4L / 6.6L / 6.9L / 7.0L and 1964-1967 Pontiac Catalina 6.4L / 6.6L / 6.9L / 7.0L. See the "Vehicles it fits" section for the full list with engine codes such as V8-5.7L and V8-6.4L.
Fel-Pro designs its gaskets for the real-world repair environment, where sealing surfaces are rarely perfect. This carburetor base gasket combines an application-specific design with Fel-Pro's proprietary materials and is intended to deliver a dependable seal on the listed applications.
The listed applications use one gasket. Signs this gasket may need replacing include a rough or unsteady idle, a hissing sound near the carburetor base, or fuel seepage at the joint. Diagnose the cause before replacing, since other components can produce the same symptoms.
Interchange: 7208 · 35101 · 548691 · 569185 · 9778970 · 702659 · 660030 · 711452000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the FEL-PRO 13834 carburetor mounting gasket do?
It seals the joint between the carburetor base and the intake manifold, helping keep unmetered air out and fuel from seeping past the mounting surface.
Will this gasket fit a 1961 Chevrolet Impala 5.7L?
Yes. The 1961 Chevrolet Impala 5.7L is a listed application. Check the "Vehicles it fits" section to confirm your exact vehicle and engine.
Does it fit the 1964-1967 Pontiac Bonneville 6.4L / 6.6L / 6.9L / 7.0L and 1964-1967 Pontiac Catalina 6.4L / 6.6L / 6.9L / 7.0L?
Yes. It is listed for the 1964-1967 Pontiac Bonneville 6.4L / 6.6L / 6.9L / 7.0L and the 1964-1967 Pontiac Catalina 6.4L / 6.6L / 6.9L / 7.0L, with the matching engines shown in the "Vehicles it fits" section.
How many gaskets does my carburetor need, and how many bolt holes does it have?
The listed applications use one gasket, and this gasket has 4 bolt holes.
What should I do when installing it?
Clean the carburetor base and intake manifold surfaces thoroughly. Then tighten the mounting fasteners evenly to the torque given in your vehicle's service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.