Help keep the joint at the base of your carburetor sealed against vacuum leaks with the FEL-PRO carburetor mounting gasket, part number 60048, a premium-grade gasket built for real-world repair work. It fits many classic vehicles, among them the 1957-1967 Ford F-100 4.4L / 4.8L / 5.4L / 5.8L / 5.9L, 1957-1967 Ford F-250 4.4L / 4.8L / 5.4L / 5.8L / 5.9L and 1957-1967 Ford F-350 4.4L / 4.8L / 5.4L / 5.8L / 5.9L. See the "Vehicles it fits" section for the full list.
Depending on the application, this gasket is cataloged for the carburetor-to-intake-manifold, carburetor-to-spacer, spacer-to-intake-manifold, carburetor-to-governor or governor-to-intake-manifold position. It is a direct-fit replacement for the listed applications.
- Made for the repair environment: Fel-Pro designs its gaskets to give a reliable seal even on troublesome applications. They are built for sealing surfaces that are less than perfect and are made with proprietary materials.
- Application-specific design: shaped for the listed applications and validated for fit, form and function, with four bolt holes.
- OE-level standards: Fel-Pro rates this gasket as meeting or exceeding all original equipment specifications.
- Engineered to exacting standards: every Fel-Pro gasket, however small, goes through proprietary design, engineering and manufacturing processes.
A worn mounting gasket can let unmetered air or fuel leak past the carburetor base. Signs it may need replacing include a rough or unstable idle, a hissing sound near the carburetor, or fuel seepage at the joint. Diagnose the cause first. If a leaking gasket is the problem, this part replaces it.
The listed applications use one or two of these gaskets, depending on vehicle and engine. Country of origin: United States.
Interchange: 35052 · B7A9447A · B8A9447A · B9AE9447A · C2AZ9447D · C2AZ9447F · C4TZ9447D · C5TZ9447A · EDB9447A · EDB9447C · EDC9447A · EDC9447B · EDC9447D · G26072 · 615067 · 660186 · CM55147 · 711390800
This part cross-references / interchanges with the following part numbers:
35052, B7A9447A, B8A9447A, B9AE9447A, C2AZ9447D, C2AZ9447F, C4TZ9447D, C5TZ9447A, EDB9447A, EDB9447C, EDC9447A, EDC9447B, EDC9447D, G26072, 615067, 660186, CM55147, 711390800
Frequently Asked Questions
What does the FEL-PRO 60048 carburetor mounting gasket do?
It seals the joint between the carburetor and the intake manifold, or a spacer or governor where one is fitted. This helps keep air and fuel from leaking past the carburetor base.
Is this a FEL-PRO carburetor base gasket?
Yes. A carburetor mounting gasket is commonly called a carburetor base gasket because it sits under the carburetor. FEL-PRO 60048 has four bolt holes.
Will it fit a 1957-1967 Ford F-100 4.4L / 4.8L / 5.4L / 5.8L / 5.9L?
Yes, it is listed for that truck. Years differ by engine, so check the "Vehicles it fits" section for your exact year and engine.
How many of these gaskets do I need?
The listed applications use one or two gaskets, depending on vehicle and engine. Check the quantity for your application in the "Vehicles it fits" section before ordering.
What should I know when installing this carburetor gasket?
Clean both mating surfaces fully and set the gasket in its correct position. Then tighten the fasteners to the values in the vehicle service information.
