FEL-PRO Carburetor Mounting Gasket P/N:60255
FEL-PRO 60148 carburetor mounting gasket for the 1969-1971 Ford Mustang V8 7.0L and other vehicles seals the joint between the carburetor and the spacer. It is designed for imperfect sealing surfaces and made with proprietary materials.
Fuel seepage or an air leak around the carburetor base, or a rough idle, can mean this gasket has failed. Before you replace it, rule out other causes such as a vacuum leak elsewhere or an ignition problem, because the same signs can come from other parts.
It is listed for a wide range of Chevrolet, Ford, Mercury and Pontiac models, including the 1965-1968 Chevrolet Impala V8 6.5L, the 1966-1969 Impala V8 7.0L, the 1970 Impala V8 6.6L or 7.4L, the 1967-1969 Chevrolet Camaro V8 4.9L or 6.5L, the 1969 Camaro V8 5.0L or 7.0L and the 1970 Camaro V8 6.6L. It meets or exceeds all original equipment specifications. The 1969-1971 Ford Mustang V8 7.0L takes one gasket.
Fit and size
Build and materials
Interchange: 35041 · CM002 · C9AZ9447B · C9AZ9447D · 3868827 · 3881847 · 682914 · G14733 · 647616 · 660032 · 711369000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this FEL-PRO 60148 carburetor mounting gasket right for a 1969-1971 Ford Mustang V8 7.0L?
Yes. FEL-PRO 60148 is listed for the 1969-1971 Ford Mustang V8 7.0L. If your car is a different model, look it up in the "Vehicles it fits" section on this page.
How many bolt holes does the FEL-PRO 60148 gasket have?
FEL-PRO 60148 has 2 bolt holes and sits between the carburetor and the spacer. This listing is one gasket.
Is C9AZ9447B an interchange number for this carburetor mounting gasket?
Yes. C9AZ9447B is listed as an interchange number for FEL-PRO 60148, along with C9AZ9447D, 35041 and other numbers on the Interchange line.
Can a leaking carburetor mounting gasket cause a rough idle?
It can, if air or fuel escapes at the joint, though a rough idle has other causes too. With the engine off and cool, a look for fuel seepage around the carburetor base is a safe first check.
Is the FEL-PRO 60148 carburetor mounting gasket made in the United States?
Yes. The country of origin for FEL-PRO 60148 is the United States.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.