FEL-PRO Engine Crankshaft Seal Kit P/N:BS 40640-1
FEL-PRO BS 40345-1 rear crankshaft seal kit for the 1984-1995 Toyota 4Runner 4-cylinder 2.4L and other vehicles keeps engine oil from escaping around the rotating crankshaft. This FEL-PRO crankshaft seal kit meets or exceeds all original equipment specifications.
Oil seeping from the rear of the engine or oil spots under the parked vehicle can mean the crankshaft seal is worn. These signs alone do not prove this seal is the problem, since a leaking valve cover gasket can leave oil in the same area.
The engine takes one kit, at the rear of the crankshaft. It is listed for a wide range of Toyota models, led by the 1970-1971 Toyota Pickup 4-cylinder 1.9L, the 1972-1974 Pickup 4-cylinder 2.0L, the 1975-1980 Pickup 4-cylinder 2.2L and the 1981-1995 Pickup 4-cylinder 2.4L, and by the 1978-1980 Cressida 6-cylinder 2.6L, the 1981-1988 Cressida 6-cylinder 2.8L and the 1989-1992 Cressida 6-cylinder 3.0L. If your vehicle is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 0523468 · 17225 · 17227 · L497401 · JV501 · 636132 · 9031180001 · 181011301
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the FEL-PRO BS 40345-1 work on a 1984-1995 Toyota 4Runner 4-cylinder 2.4L?
Yes. FEL-PRO BS 40345-1 is listed for the 1984-1995 Toyota 4Runner 4-cylinder 2.4L. For another year or engine, look in the "Vehicles it fits" section on this page.
Is this FEL-PRO engine crankshaft seal kit for the front or rear of the crankshaft?
It is for the rear. The FEL-PRO BS 40345-1 listing is one kit, and the engine takes one.
What is the seal in this rear crankshaft seal kit made of?
The part material is rubber, in a one-piece design.
How can I tell a rear crankshaft seal is leaking?
Look for oil seeping at the rear of the engine or oil spots under the vehicle, checked with the engine off and cool. A shop can confirm where the oil is coming from.
Is 17225 a cross-reference for this crankshaft seal kit?
Yes. 17225 is one of the interchange numbers for FEL-PRO BS 40345-1, along with 17227 and JV501.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.