FEL-PRO Engine Cylinder Head Gasket Set P/N:HS 8169 PT-4
FEL-PRO 8169 PT cylinder head gasket for the 1987-1990 Jeep Wrangler 6-cylinder 4.2L and other vehicles seals the joint between the cylinder head and the engine block. FEL-PRO head gaskets are made for the repair environment, and this one is built to exceed all original equipment specifications.
A leaking head gasket can show up as coolant loss, overheating or milky-looking oil. These signs alone do not prove the gasket is the problem, since a worn thermostat can also cause overheating.
For a cylinder head replacement, the 1987-1990 Jeep Wrangler 6-cylinder 4.2L, the 1974-1980 Jeep Cherokee 6-cylinder 4.2L, the 1986-1988 American Motors Eagle 6-cylinder 4.2L and many other vehicles take this gasket, one per engine. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One cylinder head gasket. Gasket sealant is not included.
Interchange: 10114300 · 3174627 · 3179287 · 3187946 · 3190344 · 3190345 · 3228469 · 387096C1 · 8133856 · 20010CS · 20010 · 70010CS · 1199 · 616381 · 6903M · B6903M · HG31150 · 4802 · 611054500
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this head gasket fit a 1987-1990 Jeep Wrangler 6-cylinder 4.2L?
Yes. The FEL-PRO 8169 PT is listed for the 1987-1990 Jeep Wrangler 6-cylinder 4.2L and takes one gasket per engine. Open the "Vehicles it fits" section to check other models.
Is this a cylinder head gasket for the 1974-1980 Jeep Cherokee 6-cylinder 4.2L?
Yes. The FEL-PRO 8169 PT cylinder head gasket is listed for the 1974-1980 Jeep Cherokee 6-cylinder 4.2L, with one gasket per engine.
Does the FEL-PRO 8169 PT come with gasket sealant?
No. This listing is one cylinder head gasket, and gasket sealant is not included.
How thick is this PermaTorque head gasket?
This PermaTorque gasket is 0.042 in thick, with a manufactured thickness range of 0.0415-0.0485 in. Its head gasket bore is 3.888 in for a 3.890 in cylinder bore.
What are the signs an engine cylinder head gasket is failing?
Coolant loss with no visible leak, overheating or milky-looking oil can mean a failing head gasket. A shop can run a pressure or compression test to confirm it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.