FEL-PRO Engine Cylinder Head Gasket P/N:26330 PT
FEL-PRO 9253 PT right cylinder head gasket for the 1997-2003 Ford F-150 V6 4.2L and other vehicles seals the cylinder head to the engine block. Also called an engine cylinder head gasket, it keeps combustion pressure, coolant and oil in their own passages.
Coolant disappearing with no puddle, overheating or milky oil on the dipstick can mean a head gasket is leaking, but other faults show the same signs. Before replacing it, look at the coolant level (engine off and cool) and the dipstick oil for mixing, and leave pressure tests to a shop. This listing is one gasket for the right side; the 1997-2003 Ford F-150 V6 4.2L takes one for that side, the left side is ordered separately, and both sides are normally replaced together.
The 1997-2003 Ford F-150 V6 4.2L, the 1999-2004 Ford Mustang V6 3.8L and 2004 Mustang V6 3.9L, and the 2004-2007 Ford Freestar V6 3.9L or 4.2L are all covered by this gasket, and more vehicles besides. If your car is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One right cylinder head gasket. Gasket sealant is not included.
Interchange: AHG493R · 20869 · F65Z6051AE · 54175 · 852322 · 611036100
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Ford F-150 cylinder head gasket right for the 1997-2003 F-150 V6 4.2L?
Yes. FEL-PRO 9253 PT fits the 1997-2003 Ford F-150 V6 4.2L on the right side; the left side is a separate part.
Is this Ford Mustang cylinder head gasket right for the 1999-2004 Mustang V6 3.8L?
Yes. FEL-PRO 9253 PT fits the 1999-2004 Ford Mustang V6 3.8L and the 2004 Mustang V6 3.9L, on the right side.
Do FEL-PRO head gaskets like this one come with sealant?
No. Gasket sealant is not included with this right cylinder head gasket, which is sold as a single gasket.
What thickness and bore does this head gasket have?
This right head gasket is 0.045 inch thick with a 3.91 inch bore.
What sealing surface finish can this gasket handle?
FEL-PRO 9253 PT has a proprietary coating that helps it withstand sealing surface finishes up to 80 Ra.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.