FEL-PRO Engine Cylinder Head Gasket P/N:26397 PT
FEL-PRO 9517 PT right cylinder head gasket for the 2005-2010 Chrysler 300 V6 2.7L and other vehicles seals the joint between the cylinder head and the engine block. This FEL-PRO cylinder head gasket is designed for imperfect sealing surfaces in the repair environment.
Coolant loss, overheating or white exhaust smoke can mean the cylinder head gasket has failed. A cracked cylinder head, a warped sealing surface or a leaking coolant hose can produce similar symptoms, so find the cause before you buy. This listing is one right-side gasket; the left side is a separate part, and both sides are normally replaced together.
The vehicles it fits include the 2005-2010 Chrysler 300 V6 2.7L, the 2006-2010 Dodge Charger V6 2.7L and the 2008-2010 Dodge Avenger V6 2.7L.
Fit and size
Build and materials
One right cylinder head gasket; the right side takes one. Gasket sealant is not included.
Interchange: AHG235L · 4663694AC · 4792932AA · 4792932AC · 20872 · 20873 · 54231 · 611003500 · 611036900
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Chrysler 300 cylinder head gasket right for a 2005-2010 model with the V6 2.7L?
Yes. The FEL-PRO 9517 PT right-side gasket is listed for the 2005-2010 Chrysler 300 V6 2.7L. If your car is a different model, look it up in the "Vehicles it fits" section on this product page.
Is this Dodge Charger cylinder head gasket right for the 2006-2010 model with the V6 2.7L?
Yes. The 2006-2010 Dodge Charger V6 2.7L is listed for the right-side FEL-PRO 9517 PT, and it takes one gasket for that side.
Is sealant included with this engine cylinder head gasket?
No. Gasket sealant is not included with the FEL-PRO 9517 PT. The listing is one right-side gasket only.
Are FEL-PRO head gaskets like this PermaTorque MLS one coated?
Yes. This gasket has a proprietary coating that helps it withstand rougher sealing surface finishes up to 80 Ra.
How thick is the FEL-PRO 9517 PT cylinder head gasket?
This cylinder head gasket is 1.493 mm thick. Its cylinder bore diameter is 3.480 in (88.38 mm).
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.