FEL-PRO HS 7799 CS-2 cylinder head gasket set for the 1965-1968 International M1100 6-cylinder 3.6L, the 1965-1970 M1100 6-cylinder 3.9L or 4.3L and other vehicles seals the joint between the cylinder head and the engine block.
- Designed for imperfect sealing surfaces
- Manufactured with proprietary materials
- Gaskets and seals for a valve grind or head reconditioning job
- Application-specific design
- Engineered and manufactured specifically for the repair environment
Quick facts
- Part: FEL-PRO HS 7799 CS-2 cylinder head gasket set
- Also called: engine cylinder head gasket set
- Fits: the 1965-1968 International M1100 6-cylinder 3.6L, the 1965-1970 M1100 6-cylinder 3.9L or 4.3L and other vehicles
Coolant loss, overheating or milky-looking oil can mean a leaking head joint. A failing radiator hose, a loose clamp or a worn water pump can also be behind coolant loss or overheating, so track down the cause before you buy a gasket set. If the head joint is the cause, this engine cylinder head gasket set supplies the gaskets and seals for the repair.
Fits
This set is listed for a wide range of International models, including the 1965-1968 International M1200 6-cylinder 3.6L, the 1965-1970 M1200 6-cylinder 3.9L or 4.3L and the 1969-1970 International 1000D 6-cylinder 3.9L or 4.3L. Look up your own model, year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Cylinder bore diameter: 3.9375 in
- Quantity per application: 1
- Part design: tilt valve; valve cover is 6 wide x 4 1/2 high
Build and materials
- Type: head set
- Country of origin: United States
In the box
One cylinder head gasket set. This listing is one set, and the quantity per application is 1.
Interchange: HS3153W · 021031701
Frequently Asked Questions
Is the FEL-PRO HS 7799 CS-2 listed for the 1965-1968 International M1100 6-cylinder 3.6L?
Yes, FEL-PRO HS 7799 CS-2 is listed for that vehicle and for the 1965-1970 M1100 6-cylinder 3.9L or 4.3L. Look for any other vehicle in the "Vehicles it fits" section.
What cylinder bore diameter is listed for this cylinder head gasket set?
FEL-PRO HS 7799 CS-2 lists a cylinder bore diameter of 3.9375 inches.
Is this FEL-PRO cylinder head gasket listing one gasket or a set?
It is a set. Head sets contain the gaskets and seals for a valve grind or head reconditioning job, and the quantity per application is 1.
Where are FEL-PRO head gaskets like this set made?
The country of origin for this cylinder head gasket set is the United States.
Is HS3153W an interchange number for this cylinder head gasket set?
Yes. HS3153W is listed as an interchange number for FEL-PRO HS 7799 CS-2.
