FEL-PRO Engine Intake Manifold Gasket Set P/N:MS 98008 T
FEL-PRO MS 98008 T-3 lower intake manifold gasket set for the 2000-2003 Ford F-150 V8 5.4L and other vehicles seals the intake manifold joint against air leaks. The FEL-PRO intake manifold gasket set is engineered for the repair environment and for imperfect sealing surfaces.
A hissing sound, a rough idle or a lean-condition code can mean air is leaking at the manifold gasket. Before you replace this set, rule out other vacuum leaks, such as a split vacuum hose, since a hose leak can produce a rough idle too. If the gasket is the cause, this set replaces it.
The 2000-2003 Ford F-150 V8 5.4L, the 2000-2004 Ford Expedition V8 5.4L and the 2008-2010 Ford E-150 V8 5.4L all take this set, and so do other Ford models.
Fit and size
Build and materials
This listing is one intake manifold gasket set, and the vehicle takes one.
Interchange: 111057701
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Ford F-150 intake manifold gasket right for the 2000-2003 model with the V8 5.4L?
Yes. FEL-PRO MS 98008 T-3 fits the 2000-2003 Ford F-150 V8 5.4L and many other vehicles. If your truck or van is not named here, find it in the "Vehicles it fits" section on this page.
Does the FEL-PRO engine intake manifold gasket set replace number 111057701?
Yes. 111057701 is listed as an interchange number for FEL-PRO MS 98008 T-3, so this set replaces a part carrying that number.
What carrier does this FEL-PRO manifold gasket use?
This set is listed as PermaDryPlus rigid carrier intake manifold gaskets. The carrier resists high heat and coolants, and rubber sealing beads help eliminate potential leak paths.
What can a leaking lower intake manifold gasket look like?
A hiss near the manifold, a rough idle or a lean-condition code can mean air is leaking past the gasket. A shop can run a leak test to find the source.
What do the torque limiters in this FEL-PRO set do?
Torque limiters help prevent overtightening, which can split or extrude a gasket. Locating tabs on the gaskets hold the alignment for an easier installation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.