FEL-PRO Engine Valve Cover Gasket Set P/N:VS 13160 C
FEL-PRO VS 50190 C valve cover gasket set for the 1958-1962 Chevrolet Impala 6-cylinder 3.8L and other vehicles seals the valve cover to the cylinder head. This FEL-PRO valve cover gasket is engineered and manufactured specifically for the repair environment.
Oil seeping along the edge of the valve cover or a burning-oil smell can mean the gasket is leaking. Before you replace the gasket set, rule out another oil source higher on the engine, since oil can run down and look like a valve cover leak.
The 1958-1962 Chevrolet Impala 6-cylinder 3.8L, the 1960-1962 Chevrolet Suburban 6-cylinder 3.8L, the 1961-1962 Suburban 6-cylinder 4.3L, the 1960-1963 Chevrolet K20 Pickup 6-cylinder 3.8L and the 1961-1962 K20 Pickup 6-cylinder 4.3L are among the vehicles it fits, and each takes one set. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One valve cover gasket set. Gasket sealant, hold-down tabs, an oil fill plug grommet and a PCV valve grommet are not included, and old hold-down tabs may not be reusable, so plan on new ones.
Interchange: 19359 · 3708648 · 3836081 · VS39687 · 755134 · CV818CE · 151040601
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Chevy Impala valve cover gasket for a 1958-1962 Chevrolet Impala 6-cylinder 3.8L?
Yes. FEL-PRO VS 50190 C fits the 1958-1962 Chevrolet Impala 6-cylinder 3.8L, and that car takes one. For another model, open the "Vehicles it fits" section and check your engine.
Does the FEL-PRO valve cover gasket set come with sealant?
No. Gasket sealant, hold-down tabs, an oil fill plug grommet and a PCV valve grommet are not included with FEL-PRO VS 50190 C. The listing is one valve cover gasket set.
Is the FEL-PRO cork valve cover gasket made from cork or rubber?
This valve cover gasket is Blue Stripe cork-rubber, a proprietary cork-rubber formulation. It is 0.219 inch thick.
Is the FEL-PRO engine valve cover gasket set tested on a vehicle?
Yes. FEL-PRO VS 50190 C is tested on the vehicle and validated for performance on the road.
How can I tell if my valve cover gasket is leaking oil?
Oil wetness or seepage along the edge of the valve cover, or a burning-oil smell, can mean the gasket is leaking. Look with the engine off and cool.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.