FEL-PRO Exhaust Flange P/N:61708
FEL-PRO 61680 rear exhaust flange for the 2011-2016 Chevrolet Cruze 4-cylinder 1.8L and other vehicles seals the joint between two exhaust pipe sections. It sits between the mating flanges at the converter, front pipe and resonator joints, where exhaust gas would otherwise escape.
When this exhaust flange wears out, it can show up as a ticking or puffing exhaust noise, an exhaust smell or soot around the joint. Exhaust leaks elsewhere sound much alike, so have the cool, parked exhaust inspected for soot marks at this joint before you replace this part.
It meets or exceeds all original equipment specifications. It fits the 2011-2016 Chevrolet Cruze 4-cylinder 1.8L, the 2012-2018 Chevrolet Sonic 4-cylinder 1.8L and the 2016 Chevrolet Cruze Limited 4-cylinder 1.8L, among other vehicles. The 2011-2016 Chevrolet Cruze 4-cylinder 1.8L takes one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 13277713 · 711579700
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the FEL-PRO 61680 exhaust flange right for a 2011-2016 Chevrolet Cruze 4-cylinder 1.8L?
Yes. FEL-PRO 61680 fits the 2011-2016 Chevrolet Cruze 4-cylinder 1.8L. For other years and engines, look in the "Vehicles it fits" section.
Does this exhaust flange fit the 2012-2018 Chevrolet Sonic 4-cylinder 1.8L or the 2016 Chevrolet Cruze Limited 4-cylinder 1.8L?
Yes. Both the 2012-2018 Chevrolet Sonic 4-cylinder 1.8L and the 2016 Chevrolet Cruze Limited 4-cylinder 1.8L are in this part's fitment.
Which exhaust joints is the FEL-PRO 61680 exhaust flange made for?
FEL-PRO 61680 is listed for the converter to resonator assembly, front pipe to converter (rear) and converter (rear) to resonator assembly joints. Each vehicle takes one.
What can a leaking exhaust flange sound or look like?
Signs can include a ticking or puffing exhaust noise, an exhaust smell near the car or soot around the joint.
Is the FEL-PRO 61680 made for uneven flange surfaces?
Yes. FEL-PRO 61680 is made with proprietary materials and designed for imperfect sealing surfaces.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.