Keep cabin cooling working the way it should with the Four Seasons A/C Evaporator Core 64133, a plate-and-fin evaporator that installs as a direct-fit replacement for the 2014-2017 Acura MDX, 2016-2020 Honda Pilot, and 2017-2020 Honda Ridgeline. Mounted inside the HVAC case, the evaporator is where cold refrigerant absorbs heat from the air passing over its fins, cooling and dehumidifying the air sent into the passenger compartment.
- Plate & fin core: a plate-and-fin design built to deliver OE-level cooling performance and efficiency.
- Optimized refrigerant flow: internal passages route refrigerant through the core for even heat absorption.
- Application-specific design: shaped to fit the listed vehicles' HVAC housing.
- Seals included: contains the gaskets, o-rings, or seals needed to properly replace the product.
Backed by over 50 years of Four Seasons mobile A/C experience. If the original evaporator is leaking refrigerant, restricting airflow, or no longer cooling, this core replaces it. Weak cooling can have other causes, so have the system diagnosed before replacing.
Interchange: 80215TZ5A41 · 80215TZ5A42 · 80215TZ5A43 · 773343 · 4712279 · 80215TG7A41 · 289190 · A89190 · 92871 · EV9409285PFC
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
80215TZ5A41, 80215TZ5A42, 80215TZ5A43, 773343, 64133, 4712279, 80215TG7A41, 289190, A89190, 92871, EV9409285PFC
Frequently Asked Questions
What vehicles does the 64133 evaporator core fit?
It is a direct-fit replacement for the 2014-2017 Acura MDX, 2016-2020 Honda Pilot, and 2017-2020 Honda Ridgeline. See the "Vehicles it fits" section to confirm your vehicle.
What does the A/C evaporator core do?
Inside the HVAC case, cold refrigerant flows through the core and absorbs heat from the air passing over its fins, cooling and dehumidifying the air sent into the cabin.
Does this evaporator include seals?
Yes. It contains the gaskets, o-rings, or seals needed to properly replace the product.
What type of core is this?
It is a plate-and-fin evaporator core, with optimized refrigerant flow and an application-specific design built to deliver OE-level cooling performance and efficiency.
How do I know if my evaporator needs replacing?
Signs may include refrigerant leaks, restricted airflow, or weak or no cooling. These can have other causes, so have the A/C system diagnosed before replacing the core.
