Carter P74963M fuel pump module for the 2001-2004 Ford Escape 4-cylinder 2.0L or V6 3.0L and other vehicles draws gasoline from the tank and sends it toward the engine. This in-tank module is a standard replacement grade.
- Housing made of POM
- Nitrile rubber gasket or seal included
- External strainer on the single inlet
- One round male connector, negative ground
- Made with all new materials under quality controlled manufacturing and testing procedures
Quick facts
- Part: Carter P74963M fuel pump module
- Also called: fuel pump assembly
- Fits: 2001-2004 Ford Escape 4-cylinder 2.0L or V6 3.0L and other vehicles
- Material: POM housing
- Condition: New
Long cranking, stalling or a whine from the tank can mean the pump is worn, but a failed fuel pump relay or a restricted fuel filter can sit behind them too, so rule those out first. If the module is the cause, this one replaces it. The fuel tank takes one module, and this listing is one.
Fits
It is a direct-fit replacement for the 2001-2004 Ford Escape 4-cylinder 2.0L or V6 3.0L and the 2001-2004 Mazda Tribute 4-cylinder 2.0L or V6 3.0L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Housing length: 220 mm (8.66 in)
- Housing width: 140 mm (5.51 in)
- Outlet outside diameter: 0.37 in
- Inlet fitting thread size: 3/8 - 16
- Outlet fitting thread size: 5/16 - 18
Build and materials
- Housing material: POM
- Gasket or seal material: nitrile rubber
- Mounting: in tank, for gas
- Inlet: external strainer
- Connector: 1 round male
- Condition: New
- Country of origin: Mexico
In the box
One fuel pump module with a nitrile rubber gasket or seal. The lock ring, mounting hardware, fuel sending unit, fuel tank pressure sensor and anti-rattle spring are not included, so plan on a new lock ring and mounting hardware rather than reusing the old ones.
Frequently Asked Questions
Is this the 2001-2004 Ford Escape fuel pump module for the 4-cylinder 2.0L and V6 3.0L engines?
Yes. Carter P74963M fits the 2001-2004 Ford Escape 4-cylinder 2.0L or V6 3.0L and the 2001-2004 Mazda Tribute 4-cylinder 2.0L or V6 3.0L.
What is included with this Carter fuel pump assembly?
Carter P74963M comes with the pump module and a nitrile rubber gasket or seal. The lock ring, mounting hardware, fuel sending unit, fuel tank pressure sensor and anti-rattle spring are not included.
What thread sizes do the inlet and outlet fittings on this fuel pump module have?
The inlet fitting thread is 3/8 - 16 and the outlet fitting thread is 5/16 - 18. The module has one inlet and one outlet.
Does this module mount inside the fuel tank?
Yes. Carter P74963M is an in-tank gas module with an external strainer on the inlet and one round male connector. It is wired for negative ground.
Is it okay to keep driving with a weak fuel pump module?
No. A weak pump can leave the engine stalling without warning, so have it checked by a shop promptly and replace the module if it is the cause.
