Accessory Drive Belt for 1930 Auburn Model 6-85 & More - Gates 3310

$14.99

Vehicles this part fits

    Part number: 3310
    UPC: 072053007107
    Condition: New
    Weight: 0.27 LBS
    Item Package Quantity: 1
    $14.99
    Adding to cart… The item has been added

    Have questions?

    Gates Accessory Drive Belt P/N:3310
    Gates Accessory Drive Belt P/N:3310
    $14.99
    $14.99

    Gates 3310 accessory drive belt for the 1930 Auburn Model 6-85 6-cylinder 3.0L and other vehicles carries drive from the engine to the generator.

    • Truflex FHP low horse-power V-belt for light-duty applications, including fractional horsepower motors
    • Length stability for minimal take-up, including on applications with backside idlers
    • Flex-bonded cords forged to the belt body for equal load distribution and resistance to fatigue and shock loads
    • Flex-Weave cover, a patented fabric construction, protects the belt core from oil, contaminants and heat
    • Meets RMA oil and heat-resistant standards and static conductivity requirements
    • Smooth, quiet operation

    Quick facts

    • Part: Gates 3310 accessory drive belt
    • Fits: 1930 Auburn Model 6-85 6-cylinder 3.0L and other vehicles
    • Position: Generator
    • Material: EPDM belt, polyester cord
    • Condition: New

    A worn belt can show cracks, frayed edges or a squeal. A squeal can also come from a pulley that is misaligned or worn, so with the engine off and cool, look over the belt and pulleys for damage or misalignment before replacing the belt. It is not meant for applications where medium-horsepower FHP V-belts are recommended.

    Fits

    The 1930 Auburn Model 8-95 8-cylinder 4.1L and the 1929 Auburn Model 76 are two more that take this belt, one belt each. If your Auburn is not named here, open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Position: Generator
    • Quantity per vehicle: 1
    • Cross section: 5L
    • Top width: 17 mm (0.66 in)
    • Effective length: 786 mm (30.94 in)
    • Outside circumference: 787 mm (31 in)
    • Strands: 1

    Build and materials

    • Type: FHP low horse-power V-belt
    • Construction: Wrapped, not notched
    • Belt material: EPDM
    • Cord material: Polyester
    • Condition: New
    • Country of origin: Mexico

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the Gates 3310 accessory drive belt fit the 1930 Auburn Model 6-85 6-cylinder 3.0L?

    Yes. Gates 3310 fits the 1930 Auburn Model 6-85 6-cylinder 3.0L, the 1930 Auburn Model 8-95 8-cylinder 4.1L and the 1929 Auburn Model 76. Other Auburn models are in the "Vehicles it fits" section.

    What cross-section and length does this Gates V-belt have?

    Gates 3310 is a single-strand belt with a 5L cross-section, a 17 mm top width and a 786 mm (30.94 in) effective length.

    What is this accessory drive belt made of?

    The belt is EPDM with a polyester cord, wrapped construction and no notches. A Flex-Weave fabric cover protects the core from oil, contaminants and heat.

    How do I tell if the belt on my generator drive is worn?

    Cracks, frayed edges or glazed sides can mean the belt is worn. Look it over with the engine off and cool; a shop can test belt tension.

    Can I use this Truflex belt where a medium-horsepower FHP V-belt is recommended?

    No. This Truflex FHP low horse-power V-belt is not for applications where medium-horsepower FHP V-belts are recommended.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review