Gates Accessory Drive Belt P/N:9400HD
Gates 9530HD belt drive components for the 1977-1987 Ford F-150 5.0L / 5.8L / 7.5L and other vehicles are a single-strand, notched belt that drives engine accessories on heavy-duty drives.
A worn belt can show up as squealing, cracks or frayed edges. Noise by itself doesn't prove the belt is the problem, since a loose or misaligned pulley can make it too.
It fits the 1977-1987 Ford F-250 5.0L / 5.8L / 6.6L / 7.5L and the 1974-1975 Jeep Cherokee 5.9L / 6.6L, along with many other vehicles. The 1977-1987 Ford F-150 5.0L / 5.8L / 7.5L takes one belt.
Fit and size
Build and materials
Will the Gates 9530HD fit a 1974-1975 Jeep Cherokee 5.9L / 6.6L?
Yes. Gates 9530HD is listed for the 1974-1975 Jeep Cherokee 5.9L / 6.6L, as well as the 1977-1987 Ford F-150 5.0L / 5.8L / 7.5L. If your car isn't named here, look it up under the "Vehicles it fits" section.
Is the Gates 9530HD the same as a Gates carbon drive belt?
No. Gates 9530HD is one EPDM belt for heavy-duty drives, not a Gates belt drive system, and it includes no Gates belt drive crankset or Gates belt drive chainring.
What are the width and length of the Gates 9530HD belt?
Gates 9530HD has a top width of 13 mm (.51 in), an effective length of 1347 mm (53.05 in) and an angle of 38. It is a single-strand, notched belt.
How can I tell if this heavy-duty belt is worn?
With the engine off and cool, cracks, fraying or a glazed surface can show that the belt is worn. Squealing while driving can also be a sign.
Is the Gates 9530HD made of EPDM?
Yes. Gates 9530HD is made of EPDM with a polyester cord and meets RMA oil and heat resistant standards. Country of origin: United States.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.