V-Belt for 1976-1982 Kenworth K100 & More - Gates TR24619

$55.99

Vehicles this part fits

    Part number: TR24619
    UPC: 072053277968
    Condition: New
    Weight: 0.70 LBS
    Item Package Quantity: 1
    $55.99
    Adding to cart… The item has been added

    Have questions?

    Gates Accessory Drive Belt P/N:TR24619
    Gates Accessory Drive Belt P/N:TR24619
    $55.99
    $55.99

    Gates TR24619 v-belt for the 1976-1980 Kenworth K100, the 1981 K100 6-cylinder 18.8L, the 1982 K100 and other vehicles and equipment carries engine power over the pulleys to the air conditioning compressor. It is built for heavy-duty truck, bus and off-road equipment applications.

    • Gates Green Stripe Truck and Bus Series V-belt absorbs normal shock loads without damage to the belt
    • Molded notches reduce bending stress, especially on small-diameter pulleys, and help dissipate heat
    • High-modulus, high-strength polyester tensile cord
    • EPDM belt with oil- and heat-resistant construction throughout
    • V-belt meets SAE J636b and SAE J637 specifications
    • Belt construction meets RMA oil and heat resistant standards and static conductivity requirements

    Quick facts

    • Part: Gates TR24619 v-belt
    • Fits: the 1976-1980 Kenworth K100, the 1981 K100 6-cylinder 18.8L, the 1982 K100 and other vehicles and equipment
    • Position: Air conditioning
    • Material: EPDM belt, polyester cord
    • Condition: New

    A squeal when the air conditioning turns on, cracks across the notches or glazed sides can mean the V-belt is worn. A pulley that wobbles or has a rough bearing can wear a belt the same way. With the engine off, look over each pulley in the drive for play, oil or damage before you fit the new belt. This listing is one belt.

    Fits

    The trucks it fits include the 1976-1980 Kenworth W900 and the 1981-1982 W900 6-cylinder 18.8L, plus the 1976-1982 Kenworth C500. It also fits several Caterpillar and John Deere machines. If your truck or machine is not named here, open the "Vehicles it fits" section to find your exact model and engine.

    Specifications

    Fit and size

    • Position: Air conditioning
    • Cross section: TA
    • Angle: 36 degrees
    • Top width: 17 mm (0.656 in)
    • Outside circumference: 1589 mm (62.55 in)
    • Effective length: 1574 mm (61.97 in)
    • Strand quantity: 1

    Build and materials

    • Type: Truck and Bus V-belt
    • Construction: Notched
    • Belt material: EPDM
    • Cord material: Polyester
    • Condition: New
    • Country of origin: United States

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the Gates TR24619 fit the 1976-1980 Kenworth W900 and the 1981-1982 W900 6-cylinder 18.8L?

    Yes. The Gates TR24619 V-belt fits the 1976-1980 Kenworth W900 and the 1981-1982 W900 6-cylinder 18.8L, where it runs on the air conditioning drive.

    What size is the Gates accessory drive belt TR24619?

    The Gates TR24619 V-belt has a TA cross section, a 17 mm (0.656 in) top width, a 1589 mm (62.55 in) outside circumference and a 1574 mm (61.97 in) effective length.

    Is this Green Stripe V-belt oil resistant?

    Yes. This V-belt has oil- and heat-resistant construction throughout, with an EPDM body and a high-modulus, high-strength polyester tensile cord.

    How can I tell this air conditioning V-belt is worn out?

    With the engine off, look for chunks missing from the notches, frayed edges or a belt riding low in the pulley groove; any of these can mean this V-belt is due for replacement.

    Which SAE and RMA standards does this Gates V-belt meet?

    This V-belt meets SAE J636b and SAE J637 specifications, along with RMA oil and heat resistant standards and static conductivity requirements.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review