V-Belt for 1987-1996 Kenworth T800 & More - Gates TR28437

$35.99

Vehicles this part fits

    Part number: TR28437
    UPC: 072053274585
    Condition: New
    Weight: 0.70 LBS
    Item Package Quantity: 1
    $35.99
    Adding to cart… The item has been added

    Have questions?

    Gates Accessory Drive Belt P/N:TR28437
    Gates Accessory Drive Belt P/N:TR28437
    $35.99
    $35.99

    Gates TR28437 v-belt for the 1987-1996 Kenworth T800 6-cylinder 14.0L or 14.6L and other vehicles and equipment drives engine accessories such as the fan, generator or A/C compressor. This Gates V-belt is made for heavy-duty truck, bus and off-road equipment applications.

    • Gates Green Stripe Truck & Bus Series V-belt that absorbs normal shock loads without damage to the belt
    • Molded notches lower bending stress, most of all on small-diameter pulleys, and help dissipate heat
    • High modulus, high strength polyester tensile cord
    • Oil and heat-resistant construction throughout the belt
    • Built to meet SAE J636b and SAE J637 specifications
    • Meets RMA oil and heat-resistance standards and static conductivity requirements

    Quick facts

    • Part: Gates TR28437 v-belt
    • Fits: 1987-1996 Kenworth T800 6-cylinder 14.0L or 14.6L and other vehicles and equipment
    • Position: Air conditioning, fan and generator, fan, compressor, hub and fan, hub to fan
    • Material: EPDM belt, polyester cord
    • Condition: New

    A squeal from the belt drive, cracks across the notches, or glazed and frayed sides can mean the V-belt is worn; look for these with the engine off and cool. A worn or misaligned pulley or a seized fan, generator or compressor bearing can also be behind belt noise and wear, so find the cause before you buy.

    Fits

    The 1987-1996 Kenworth T600A 6-cylinder 14.6L, the 1990-2002 T600A 6-cylinder 14.0L and the 1986-2001 Kenworth T600 are among the many vehicles and equipment this V-belt fits; the T600A takes two belts and the T600 takes one. If yours is not named here, open the "Vehicles it fits" section to find your exact model and engine.

    Specifications

    Fit and size

    • Position: Air conditioning, fan and generator, fan, compressor, hub and fan, hub to fan
    • Cross section: VA
    • Angle: 36°
    • Top width: 20 mm (.775 in, 25/32 in)
    • Outside circumference: 1125 mm (44.3 in, 44 1/4 in)
    • Effective length: 1110 mm (43.72 in)
    • Strands: 1
    • Quantity per vehicle: 1 or 2, varies by engine

    Build and materials

    • Type: Truck & Bus V-belt, notched construction
    • Material: EPDM belt, polyester tensile cord
    • Condition: New
    • Country of origin: United States

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the TR28437 fit the 1987-1996 Kenworth T800 6-cylinder 14.0L or 14.6L?

    Yes. Gates TR28437 fits the 1987-1996 Kenworth T800 6-cylinder 14.0L or 14.6L, and those trucks take two belts.

    Is the TR28437 right for a 1986-2001 Kenworth T600?

    Yes. Gates TR28437 fits the 1986-2001 Kenworth T600, which takes one belt; the "Vehicles it fits" section lets you match your exact model and engine.

    What cross section and length is this notched V-belt?

    Gates TR28437 has a VA cross section, a 20 mm (25/32 in) top width, a 1125 mm (44.3 in) outside circumference and a 1110 mm (43.72 in) effective length.

    What signs show this Green Stripe V-belt is wearing out?

    A squealing belt, cracks running across the notches, or sides that look glazed or frayed can mean this V-belt is worn. Inspect it only with the engine off and cool.

    What is the Gates accessory drive belt made of?

    This V-belt has an EPDM body with a high modulus, high strength polyester tensile cord, and it meets RMA oil and heat resistant standards.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review